Canon DC310 Instruction Manual page 54

I
To
RUN THROUGH THE STILL IMAGES
Push the joystick (...
~
) and hold it
pressed down to run quickly through
the still images.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
-"/0 switch or the operating mode.
• The following may not be displayed
correctly.
- Images not recorded with this
camcorder.
- Images edited on a computer.
- Images whose file names have been
changed.
I
To
SKIP
10
OR
100
STILL IMAGES
Slideshow
[FUNC.)
C
[~)
,SLlDESHOW]
C
[START]
• Images are played back one after
another.
• Press
' " = ,
F~UN~C~.) to stop the slideshow.
Index Screen
1
Move the zoom lever toward W.
The still images index screen
appears.
2
Select (AT, ...
~)
an image.
• Move the green selection frame to
the image you want to view.
• If you have a lot of still images, you
may find it easier to browse entire
index pages instead. Move the
zoom lever toward W to extend the
green selection frame to the whole
page, and move (...
~)
between
index pages. Move the zoom lever
toward T to return to moving
between single images.
3
Press
@.
The index screen closes and the
selected image is displayed.
FUNC.
(OJ
22)
'Y ............_ - _.........
o
IMPORTANT
• Observe the following precautions while
the card access display
(~[Q)
appears
on screen, and when the CARD access
indicator is on or flashing. Failing to do
so may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot
cover and do not remove the memory
card.
....
JUMP 10 IMAGES
3 Select (AT) (r;o JUMP 10 IMAGES]
or (!iOO JUMP 100 IMAGES].
4 Jump (...
~
) the number of images
selected and press
@.
You can press
@
again to hide the
joystick guide.
1 If the joystick guide does not
appear on screen, press
~
to
display it.
2 Push the joystick (A) toward
([j.
54 • Photos