Rear Wheel Cross Section Diagram; Tire Air Pressure; Installed Angle Of Valve Stem View; Installing 6202 R Ball Bearing By Driving - Honda C50 Shop Manual

56
Figure 4-24. l"s·a lled a ngle of valve stem
4.5 REAR WHEEL
63 0 l R ball bearing
Rear wheel axle ---~
4.
FRAME
b. The va lve stem must be pointed toward the
axle, improperly seated valve stem may cause
air leak. (Fig. 4.24)
131 Wash the old grease from the wheel hub and
the bearing, and pack with new grease. Also
f111 the hub with grease and install the distance
col lar, followed by installati on o f the 6202R boll
bearings. (Fig. 4- 25)
!41 After installing the bearings, reassemble the front
wheel and the brake shoe in the reverse o rder
of disassembly.
!51 Install the brake cable and adjust the broke lever
ploy .
!Refer o the Periodic Inspection and the section
on adjustment)
Tire Air Pressure
ormal condition
Fron 1.6- 1.8 kg/ cm
2
!22.8-25.6 lb/in
2
1
Rear 2.0-2.2kg/ cm
2
(28.4-31 .2 lb/in
2
1
~----- Axle rut
___.--- Rear wheel damper
..-----Rear wheel damper cove r
' ----Final driven flange
Figure 4- 26. Rear wheel c ross section diagram