Installation
Assemble the Power Supply
Assemble the AC adapter for the MX7 Tecton Battery Charger before connecting it to the charger.
The AC power supply for the battery charger is shipped with the battery charger. Contact
AC cable.
The battery charger power supply is intended for use with the MX7 Tecton battery charger only.
Plug the 3-prong end of the cable into an AC wall outlet.
l
Firmly press the female end of the power cable into the male connector on the AC power adapter. An LED on the power
l
adapter illuminates when AC power is available.
AC power is now being applied to the power adapter.
l
1-4
Technical Assistance
if there is no