Charger Cleaning, Storage And Service; Cleaning; Storage; Service - Honeywell MX7 Tecton User Manual

Hand-held computer battery charger user's guide

Hide thumbs Also See for MX7 Tecton:

Table of Contents

Charger Cleaning, Storage and Service

Unplug the charger from the power source before cleaning or removing debris from charging pockets.

Use only mild detergent with a slightly damp cloth to clean the outside of the charger. Do not use solvents or flammable

cleaners. Allow the case to dry fully before using again.

Do not allow cleaning agents of any kind to contact the charging contacts; they may be damaged. If necessary, clean them

with a soft-bristle, dry brush or compressed air.

Remove all batteries from the charging bays and disconnect AC power before placing the charger in storage. It should be

stored in a cool, dry place, protected from weather and airborne debris.

Battery packs should be kept in a cool, dry place whenever possible. Do not store battery packs in direct sunlight, on a metal

surface, or anywhere the battery pack cannot cool down. Do not leave the battery pack in a non-operating charger. The battery

pack may discharge through the charger rather than hold its charge.

There are no user serviceable parts in the Rechargeable Lithium Ion Battery or the Charger. Contact

Technical Assistance

should your charger require service.

1-12

Table of Contents