How To Attach The Tap Adaptor; Installing Water Supply Hose To The Washer; How To Detach The Water Supply Hose - Electrolux Aura Care Instruction Manual

How to Attach the Tap Adaptor

onto the faucet. Then, securely tighten the four screws provided with the
Tap Adaptor by u
2.Remove the CAUTION label from the Tap Adaptor.
ns using new Water Supply
Hose and Tap Adaptor Joint and old
hose-sets should not be reused.
s and remove the Joint Ring from
the Tap Adaptor.
Connecting the Water Supply Hose to the Tap Adaptor
Tap Adaptor until it clicks into place.
of the Tap Adaptor (Section A in the figure)
Supply Hose up into the
15