Table of Contents
Advertisement
Precautions to Take when Using
the Magic Motion Remote Control
Use the remote control within the maximum
y
communication distance (10 m). Using the
remote control beyond this distance, or with
an object obstructing it, may cause a com-
munication failure.
A communication failure may occur due to
y
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as this will use the
same bandwidth (2.4 GHz) as the Magic Mo-
tion Remote Control.
The Magic Motion Remote Control may be
y
damaged or may malfunction if it is dropped
or receives a heavy impact.
When playing a game using the Magic
y
Motion Remote Control, hold it securely by
wrapping its strap around your wrist and
adjusting the length with the adjustable ring.
Take care not to bump into nearby furniture
y
or other people when using the Magic Motion
Remote Control.
Manufacturer and installer cannot provide
y
service related to human safety as the ap-
plicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point
y
(AP) be located more than 1 m away from
the TV. If the AP is installed closer than 1
m, the magic motion remote control may
not perform as expected due to frequency
interference.
INPUT
MENU
ENTER
VOL
CH
WATCHING TV
Connecting to an antenna
Connect an antenna to watch TV while referring to
the following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
Connecting an antenna
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
Wall Antenna Socket
NOTE
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal
y
amplifier properly to improve the image
quality.
If the image quality is poor with an antenna
y
connected, aim the antenna to the correct
direction.
An antenna cable and converter are not
y
supplied.
35
WATCHING TV
ANTENNA/
CABLE IN
Hide quick links:
Advertisement
Table of Contents
