Kurzweil PC3A User Manual page 150

Setup Mode
Controllers
Controller
Number
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
7-24
Corresponding
Destination
Name
ProgGoto Go to Program—selects program
SetupInc Setup Increment—increments current setup number
SetupDec Setup Decrement—increments current setup number
SetpGoto Go to Setup—selects setup
Start Sequencer function
Stop Sequencer function
Continue Sequencer function
TransUp Transpose Up (ST)
TransDown Transpose Down (ST)
ArpOn Any value turns Arpeggiator On. (See The ARPEGGIATOR
Page
ArpOff Any Value turns Arpeggiator Off. (See The ARPEGGIATOR
Page
MuteZn Mute Zone – values above 64 will mute the zone, values below
or equal to 64 will unmute the zone.
ArpOrder Arpeggiator Order, each range of values selects one of nine
options in order on parameters list: 0-14, 15-28, 29-42, 43-56,
57-70, 71-84, 85-98, 99-112, 113-127. (See The
ARPEGGIATOR Page
ArpBeats Arpeggiator Beats, each range of values selects one of seven
options in order on parameters list: 0-18, 19-36, 37-54, 55-72,
73-90, 91-108, 109-127. (See The ARPEGGIATOR Page
page 7-42
ArpShift The 88 Arpeggiator Shift steps are scaled over the 128 MIDI
controller values, so that 0 = 0 steps and 127 = 88 steps. (See
The ARPEGGIATOR Page
ArpLimit The 60 Arpeggiator Shift Limit steps are scaled over the 128
MIDI controller values, so that 0 = 0 steps and 127 = 60 steps.
(See The ARPEGGIATOR Page
ArpLmtOp Arpeggiator Shift Limit Option, each range of values selects
one of seven options in order on parameters list: 0-18, 19-36,
37-54, 55-72, 73-90, 91-108, 109-127. (See The
ARPEGGIATOR Page
ArpVel Arpeggiator Velocity, each range of values selects one of
twenty-three options in order on parameters list: 0-5, 6-10,
11-15...101-105, 106-110, 111-127. (See The ARPEGGIATOR
Page
ArpDur The Arpeggiator Duration % values are scaled over the 128
MIDI controller values, so that 0 = 1% and 127 = 100%. (See
The ARPEGGIATOR Page
Latch For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 = on.
(See The ARPEGGIATOR 2 Page
Latch2 For Arpeggiator Latch Pedals mode, 0-63 = off, 64-127 = on.
(See The ARPEGGIATOR 2 Page
Table 7-4 Controller Destination List
Description
on page 7-42
)
on page 7-42
)
on page 7-42
)
on page 7-42
on page 7-42
on page 7-42
)
on page 7-42
)
on
)
on page 7-42
)
)
)
on page 7-49
)
on page 7-49
)