Repeated Playback (Repeat); Programming The Playing Order - Kompernass KH 2306 Operating Instructions Manual

• In order to play back one of the previous CD's
songs, keep pressing the button
remote control) until the number of the desired
title appears.
For MP3 CDs: 10 Title replay
• When using a MP3-CD the button
FOLDER+/+10
on the remote control (on the device
FOLD+/+10
only ) may be used to skip back or
move a head 10 titles.
For MP3 CDs: File search
• If a MP3-CD contains folders, the folder may
be searched forward or in reverse order while
pressing and holding the button
FOLDER+/+10
on the remote control (on the device
FOLD+/+10
only ). The display may show F01 for
the first folder.
Title fast forward/reverse
• Press and hold during the playback the button
BACK NEXT
or ( and
until the desired part of the song is located.

Repeated playback (REPEAT)

Audio CDs:
PROG./P-MODE
• press once:
REPEAT appears in the display. The current title is
repeated.
PROG./P-MODE
• press twice:
REPEAT ALL is displayed. The whole CD is repeated.
PROG./P-MODE
• press three times:
REPEAT ALL extinguishes. The repeated playback is
finished.
BACK
( on the
FOLDER-/-10
or
FOLDER-/-10
or
on the remote control),
MP3 CDs:
PROG./P-MODE
• press once:
REPEAT appears in the display. The current title is
repeated.
PROG./P-MODE
• press twice:
REPEAT FOLDER is displayed. The current folder is
repeated.
PROG./P-MODE
• press three times:
REPEAT ALL is displayed. The whole CD is repeated.
PROG./P-MODE
• press four times:
REPEAT ALL extinguishes. The repeated playback is
finished.

Programming the playing order

You may programme the playback sequence for up
to 20 titles for CDs and 99 titles for MP3-CDs, during
which the titles are displayed. However, this is only
possible if the play function has been stopped
PRESS THE BUTTON PROG./P-MODE
1.
and the message P01 appears in the display for
the position in the programme whose title will be
played first on the playback.
2. Use the buttons
remote control) in order to select the title which
should appear in position 1 of the programme.
3. To save the selection, press the button
PROG./P-MODE
. PROG is displayed and the
message P02 for the next programme position
appears in the display.
4. To programme in further titles, repeat the steps
described above. When all programme positions
are occupied, the entry "P01" appears in the
display
5. Start the playback of the programmed title by
pressing the button
PROG as well as the number of the title will
be shown.
- 9 -
. PROG is displayed
BACK NEXT
and ( and
PLAY/PAUSE
. In the display
on the