Disassembly Lamp Module - Sanyo PDG-DSU20N Service Manual

3.3.

Disassembly Lamp Module

Step
1
2
PDG-SU20
Figure
22
Description
Loosen the screw on the Top
cover
Remove the lamp cover.
Loosen the three screws of
lamp module
Pull the lamp module out by
lamp handle.
Insert the new lamp module
into the projector and tighten
the screws.
Replace the lamp cover and
tighten the screws.
Reset the lamp timer. Press
MENU, go to Main MENU >
SETTING >LAMP COUNTER
RESET>YES, and press
MENU.
Note: Turn on the projector. If the
lamp does not turn on after the
warm-up period, please reinstall the
lamp.