Sanyo PDG-DSU20N Service Manual page 11

USB Support - Installation (All Platforms)
This release includes support for a USB communications interface to DDP2000-based projectors.
The setup program includes the files needed to install USB support (for Windows 98/Me/2000/XP
only -- Win95, WinNT and Windows Vista are not supported). After DLP Composer ™ Lite is installed,
to install the USB support, choose the "Install DDP2000 USB Driver" icon under "DLP Composer ™
Lite" in your Start menu .
Follow the instruction on the screen to press any key and wait for the installation done.
Operating procedure
1. Connect the Projector and PC via USB cable.
2. Double-click [DLP Composer (TM) Lite]. The following screen will appear.
3. Select [Edit]/[Preferences]/[Communications] to check USB in [Projector Interface].
PDG-SU20 7