Controls And Features - JVC TM-A101G Operating Instructions Manual

CONTROLS AND FEATURES

FRONT VIEW
<Front Panel>
1
9
CHROMA CONTRAST
PHASE BRIGHT
POWER
CHROMA CONTRAST VOLUME/SELECT MENU A B
ON
OFF
INPUT SELECT
PHASE BRIGHT
Chroma/Phase button
1
[ CHROMA/ PHASE]
Press this button to activate the picture color density
adjustment mode or picture hue adjustment mode. Each
time you press the button, the adjustment item changes.
f
Picture color density Picture hue
Adjust the value with the VOLUME/SELECT buttons
Also used as a control button in the menu function mode.
2 Contrast/Brightness button
[CONTRAST / BRIGHT ]
Press this button to activate the picture contrast adjust-
ment mode or picture brightness adjustment mode. Each
time you press the button, the adjustment item changes.
f
Picture contrast Picture brightness
Adjust the value with the VOLUME/SELECT buttons
Also used as a control button in the menu function mode.
3 Volume/Select buttons
[VOLUME/SELECT – +]
Adjusts the speaker volume. Also used as a control
button in the menu function mode.
Menu button [MENU]
4
Displays and disappears the <MENU> screen.
1
Pressing the CHROMA/PHASE button with the Menu
button depressed will display the <SET-UP MENU>
screen.
4
2 5 6
POWER
VOLUME/SELECT MENU
A B
INPUT SELECT
3 4 7
5 Input A (VIDEO) button [INPUT SELECT A]
Selects the video and audio signals input to the VIDEO A
0 @
and AUDIO A terminals on the rear panel. The
button lights when selected.
Input B (VIDEO) button [INPUT SELECT B]
6
Selects the video and audio signals input to the VIDEO B
3
! #
.
and AUDIO B terminals on the rear panel. The
button lights when selected.
Power indicator
7
Lights in green when the power is ON.
Lit : When the power is on.
Unlit : When the power is off.
8 Power switch [POWER ]
Press this switch to turn the power on or off.
g ON : Power is turned on.
3
G OFF : Power is turned off.
.
9 Speaker
A built-in speaker is located inside the left side panel
when the monitor is viewed from the front.
REAR VIEW
<Rear Panel>
ON
OFF
8
10 Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO A
@
terminals .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
11 Video B terminals [VIDEO B IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO B
#
terminals .
* Also refer to BASIC CONNECTION EXAMPLE on
page 12.
Audio A terminals [AUDIO A IN/OUT]
12
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO A
0
terminal .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
VIDEO A
VIDEO A
IN OUT
IN OUT
VIDEO B
VIDEO B
IN OUT
AUDIO A
IN OUT
IN OUT
IN OUT
AUDIO B
AUDIO A
INPUT ASPECT
REMOTE
IN OUT
IN OUT
AUDIO B
INPUT ASPECT
REMOTE
13 Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio
signals corresponding to the VIDEO B terminals
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO B
!
terminals .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
14 Remote terminals
[REMOTE INPUT, ASPECT]
Remote terminals for external control. Selecting VIDEO A
or VIDEO B and ASPECT RATIO is available via external
control. External control is set in the <SET-UP MENU>
screen.
To use external control, you must build a switch cable
and connect it to the REMOTE terminals.
External control switch
External control
Open circuit
functions
(open)
0
. ASPECT RATIO 4–3 (4:3)
INPUT INPUT A
Note:
● Also refer to BASIC CONNECTION EXAMPLE on
page 12.
10
11
12
13
14
!
.
Closed circuit
(short)
16–9 (16:9)
INPUT B
5