Table of Contents
Advertisement
Cannot turn on the monitor.
●
Connect the power cord properly. (➔ page 08)
The remote control does not work.
●
Insert the batteries in the correct direction. (➔ page 04)
●
Replace the batteries with new ones.
●
Aim the remote control to the remote sensor on the monitor.
(➔ page 09)
●
The effective range of the remote control is about 7 meters.
●
Get closer to the monitor.
●
Remove any obstruction between the remote control and the monitor.
No picture from a connected device.
●
Select the correct input on the monitor.
●
Connect the external device properly.
●
Turn on the external device and start playback.
No sound.
●
Press the mute button. ( )
●
Check the amplifier connection.
●
When " AMP " is selected under " Speaker ", the sound is output from the
amplifier, and not from the speakers of the monitor. (➔ page 11)
No picture from HDMI devices.
●
Select the correct input on the monitor.
●
Use a cable marked with the HDMI logo.
●
Please use a High Speed HDMI
tested to carry an HD signal up to 1080p and higher. (➔ page 07)
The monitor turns off automatically.
●
When you want to display a picture on the monitor for a long time,
select "Off" for "Auto Shut Off" (
TM
Cable. High Speed HDMI
➔
page 27) in "Setup".
TM
Cables are
45
Advertisement
Table of Contents
