Super-thin 15"v tft lcd panel for global professional applications (2 pages)
Summary of Contents for JVC LM-H171
Page 1
LM-H191 LM-H171 LCD DISPLAY MONITOR LCD-DISPLAYMONITOR MONITEUR LCD SCHERMO A CRISTALLI LIQUIDI MONITOR PANTALLA LCD МОНИТОР С ЖК-ДИСПЛЕЕМ LCD 显示器 LCT2401-002A-H MANUAL DE INSTRUCCIONES ИHCТРУKЦИЯ ПО ЭКСПЛУАТАЦИИ The illustration of the monitor is of LM-H191. ITALIANO FRANÇAIS DEUTSCH ENGLISH INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS...
Safety Precautions WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety.
FCC NOTICE (U.S.A. only) Dear Customer, CAUTION: Changes or modifications not approved This apparatus is in conformance with the valid by JVC could void the user’s authority to operate the European directives and standards regarding equipment. electromagnetic compatibility and electrical safety.
Installation CAUTION • Do not rest your arm on the monitor or lean against the monitor. • Do not touch the LCD panel when installing the monitor. • Make sure to install the monitor securely to prevent the monitor from falling over, which causes damage to the monitor or injury.
Page 6
To adjust the stand height To change the stand height, change the position of the stand plate as illustrated below after detaching the stand from the monitor. • For detaching the stand, see “To detach the stand” on page 4. <Higher position>...
Daily Operations / Connections 7 Front panel • “NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the function does not actually work). • The items controlled by the MAKE system cannot be controlled by the buttons on the front panel (“REMOTE ON” is displayed and the lamps do not light).
Page 8
Resetting the Picture Mode Main Menu Operations You can reset the following picture Press MENU button. adjustments you have made for each Picture Mode. • Adjustments by the buttons on the front panel • “SHARPNESS,” “CTI.,” and “LTI.” in the MAIN MENU (☞...
Daily Operations / Connections 7 Rear panel Security slot Install a security wire to this slot. The illustration of the monitor is of LM-H191. Attaching the Ferrite Core Attach the ferrite core to the power cord. • Using the power cord without the ferrite core may lead to noise (interference). Open the ferrite core, insert the power cord Attach the ferrite core to the AC IN end of and close the ferrite core.
Menu Configuration—MAIN MENU For the operation procedure, see page 7. When VIDEO 1 or VIDEO 2 is selected for the input: Selected Picture Mode Select by pressing PICTURE MODE on the front panel (☞ 7 on page 6). (Not displayed when “STD.” is selected.) Operation guide Shows the buttons for each operation.
Menu Configuration—SET UP MENU For the operation procedure, see page 7. Operation guide Shows the buttons for each operation. Selected screen size Select by pressing SCAN SIZE on the front panel (☞ 6 on page 6). • The menu automatically disappears in about 30 seconds after the previous operation. •...
Page 13
Menu Configuration—SET UP MENU Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation. • Some items may not appear on the menu depending on the input or the input signal. •...
External Control 7 About the external control This monitor has the MAKE/TRIGGER terminal, which allows you to control the monitor by the make contact or the trigger system. • MAKE (make contact) system: Controls the monitor by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it.
Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action No power supply •...
8.2 kg (18.0 lbs) (with the stand) 6.4 kg (14.1 lbs) (without the stand) Accessories AC power cord x 2, Ferrite core x 1 LM-H171 Type 17 format 17˝, active matrix TFT Width: 337.9 mm (13 7/16˝) Height: 270.3 mm (10 3/4˝) 160°...
Notice on transportation This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers. 7 Dimensions LM-H191 LM-H171 <Front view>...