Advertisement
3. Assembly
Always remove the plug from the power socket before fitting or removing accessories.
Insert/remove the hose
Insert the flexible hose in the hose inlet duct on the top of the product. To do this, press the two
connection buttons until it clicks into right position, then connect the extension tube to the handle
end of the hose. Adjust the length of the extension tube by pushing the button on it, at last, fitting
the floor nozzle to the end of extension tube.
Remove the hose, press the two same buttons on the end of the hose and pull it out the hose
inlet duct, disconnect the extension tube and floor nozzle.
Usage of floor brush
Press the lever (A) for cleaning the hard floor.
Press the lever (B) for cleaning the carpets.
Suction control
The suction power can be adjusted by changing the position of the fingertip control on the handle
tube.
Advertisement
