Samsung Smart A/C application User Manual page 8

Connecting network
4
4. Select the wireless router that you are using now.
- When using free wireless router, refer to the corresponding user manual for password.
5. After entering the password of selected wireless router, press the [OK] tab.
- When the password has not been set, press the [OK] tab without entering the password.
6. When 'Transfer complete' pop up comes on, press the [OK] tab.
- When the Wi-Fi (
- When the Wi-Fi (
case, check the internet connection.
- When the Wi-Fi (
7. After 1~2 minutes, if the Wi-Fi LED of the air conditioner is still on, it means the configuration has succeeded. At this point,
you can use smart phone to control the system.
• When searching a network by pressing the [Wi-Fi] button,
maximum of 5 minute.
NOTE
• Smart A/C application is optimized with Samsung smart phones. Supported models are; Samsung Galaxy Phone
series and other models can be added in the future. When the Smart A/C application is used with other smart
CAUTION
phones, some functions may not work.
A3050 ET WiFi APP_IB_04209A-00_EN.indd 8
) indicator is on, the air conditioner is connected with wireless router and the internet.
) indicator blinks, the air conditioner is connected to wireless router but not with internet. In this
) indicator is off, the air conditioner is not connected with wireless router and the internet.
English-8
5
message will be displayed on the front display a
6
2013-10-11 14:49:35