Fault Codes - Miele W1903 User Manual

W1900 Series Clothes Washers
6.3

Fault Codes

Applies Only to Models W1966 & W1986
Retrieval
1. Access the Service Mode – Refer to Section 6.2.
2. Turn the Program Selector Switch to the WOOLENS 85 position.
3. Use table 6-3 to determine the stored fault
On the W1966 note the status of the LED Indicators
On the W1986 the fault is displayed in the "Time Remaining"
Display Window (Example: F1)
W1966 LED Status
Pre-Wash LED Flashes Faster
Main Wash LED Flashes
Rinse LED Flashes
Rinse/Hold LED Flashes
Oversuds LED is on
Water Intake LED is on
Check Darin LED Flashes
Table 6-3: Fault Codes (W1966 & W1986)
Clearing a Stored Fault Codes
1. Access the Service Mode
2. Place the Program Selector Switch to the WOOLENS 85 position
(Fault Code Retrieval position).
3. While a fault is displayed – Switch off the appliance.
-
(to be updated)
(to be updated)
51
Technical Information
W1986
Display
Cor No Faults Stored
F1 Pressure Sensor Fault
F2 NTC Sensor Fault
F3 Heating Fault
F4 Tachogenerator Fault
F5 Oversuds Condition Logged
F6 Water Intake Fault
F7 Water Drainage Fault
F8 No Final Spin
F9 NV RAM Fault
Fault