Water Settings> «Rinse; Water Settings> «Water Filter» Menu - Saeco Talea Touch Operation And Maintenance Manual

<WATER SETTINGS> «RINSE»
To clean the internal circuits in order to guarantee that the beverages are only made with fresh water. The
function is enabled as default by the manufacturer. Note: this rinse cycle is performed every time the machine is
turned on after the warming phase.
Press "water settings" and "rinse".
rinse
water
settings
on
activate the rinse
<WATER SETTINGS> «WATER FILTER» MENU
To activate/deactivate the warning to replace the "Aqua Prima" water filter. The machine informs the user when
the "Aqua Prima" water filter needs to be replaced.
Press "water settings" and "water filter".
water
settings
off
activate the control
proceed with the initialization
Important note.
This setting automatically adjusts the parameters which allow the user to perform a correct machine maintenance.
Select:
In this menu you can:
1.2.4.1. rinse
on
cycle
In this menu you can:
on
reload water
off
deactivate the rinse cycle
off
deactivate the control
Espresso Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976
21