Feature uses of the MultiBlender
Safety locking system
With safety in mind the Sunbeam
MultiBlender
was designed with a safety
™
locking system. Unless the lid and blending
jug are positioned correctly and locked in
place, the blender will not operate. To ensure
that you have correctly assembled the
blender, read the following instructions:
1.With the front of the motor base facing
toward you, place the blending jug onto the
motor base with the handle to the right.
You will notice a solid gray arrow tunder
the handle of the blending jug. When
placing the jug onto the base this arrow
needs to sit on top of the light grey arrow
on the motor base. The blending jug is
now in the correct position for you to lock it
into place. Simply hold the handle of the
jug and turn it to the right, until you hear a
slight click.
Note: You will know if the jug is in the correct
position, if both the solid grey arrow ton the
jug is aligned with the solid grey arrow son
the motor base.
2. Position the lid onto the blender jug so
that the long holding lip is facing towards
you. Turn the holding lip to the right,
approximately 45°, the holding lip should
be flush with the top of the jug handle.
Crushing Ice
Simply add ice to the blender and a small
quantity of water, which will aid in the
crushing process. Then with the pulse button
continue depressing the button on and off
and in seconds your ice is fluffy and snow-
flake like.
Unlocked
Pulse setting
The pulse button provides short bursts of
power, so that you can prepare breadcrumbs,
grind chocolate, finely grind nuts and
biscuits.
You can also use the Pulse button for
cleaning the blender. Simply pour in some
warm water and a small amount of detergent,
then use the pulse button for a few seconds.
The unit will clean itself, without you having
to handle the sharp blades. Rinse and dry,
Locked
being careful as the blades are sharp.
™
Unlocked
Locked
7