Elation PLATINUM WASH ZFX PRO User Manual page 39

Hide thumbs Also See for PLATINUM WASH ZFX PRO:

Table of Contents

the 10 available programs. Follow the procedure below to build an internal program:

•

Access the main menu and toggle to "Edit Programs" which is menu function 8.

•

Then tap the "ENTER" button and toggle to "Program 1" menu function 8-2-1.

•

When you get to the "Program 1" function tap the "ENTER" button. The screen will

then change to Edit Steps 01, this will be menu function 8-2-1-1. Use the "UP" and

"DOWN" buttons to toggle through the scenes created in "Step 1." Press the

"ENTER" button to add a scene to the program. Tapping the "Enter" button

will

automatically lock the selected scene into the programs' memory. Repeat the

process until all the desired scenes have been added to the program. Each

program

can store a maximum of 64 scenes.

•

To test the program access "Program Test" in the "Program Edit" menu function.

Step 3 – Playing a Program

To initiate a program follow the procedure below:

•

Access the main menu and use the "Up" and "Down" to toggle to "Function Mode"

and tap the "Enter" button.

•

In the next screen select "Auto Program" and tap the "Enter" button.

•

There are two selections, "Master" and "Alone." Select "Master" when running

multiple fixtures in a master/slave configuration. See section 9.2 "Master/

Slave

Operation" on page 32 for proper set-up instructions. Select "Alone" when

running a

single fixture or when multiple fixtures in stand-alone mode. See section 9.1

"Stand-Alone Operation" on page 35 for proper set-up instructions.

Platinum Wash Zfx Pro

™

Table of Contents