Elation PLATINUM WASH ZFX PRO User Manual page 27

No DMX Status – This function dictates how the fixture will function if it looses
DMX signal during normal operation. The default function is set to hold, in which the
fixture will lock into the last DMX signal it received and remain in that position until it
is turned off or begins receiving a new DMX signal. If the fixture is turned on
without any DMX signal, the fixture will automatically go in to sound-active mode.
Available settings are:
remain at its last settings.
running the built-in program.
mode.
Pan Reverse - This function allows you to invert all pan movements. Use the Up
and Down buttons to turn this function On or Off. Press the Enter button to accept
the change or the Mode button to cancel and return to the main menu. This function
is "OFF" by default.
Tilt Reverse - This function allows you to invert all tilt movements. Use the Up and
Down buttons to turn this function On or Off. Press the Enter button to accept the
change or the Mode button to cancel and return to the main menu. This function is
"OFF" by default.
Pan Degree – This function changes the maximum Pan resolution from either 540˚
or 630˚. The default function is 540˚. 630˚ operation allows for greater coverage, but
slower pan movement.
Feedback – This function turns the feedback correction on or off. This function is
set to "ON" as default. This function allows for automatic pan and tilt correction in
the event either one disrupted during normal operation.
Movement Speed
motors. There are 3 different mode variations;
Speed 1 (Default): Slower than the original Design Spot 250 for smoother, more
precise movements.
©Elation Professional® 27
"Close Shutter"
"Auto Program"
"Music Control"
– This function changes the speed function of the Pan and Tilt
– Shutter flags will close. "Hold" – Fixture will
– Fixture will go into stand-alone mode,
– The fixture will go into sound-active
Platinum Wash Zfx Pro
Platinum Wash Zfx Pro
™
™