Elation PLATINUM WASH ZFX PRO User Manual page 28

Hide thumbs Also See for PLATINUM WASH ZFX PRO:

Table of Contents

Speed 2:Pan and Tilt speeds are identical to the first generation Design Spot

250.

Speed 3:Includes a faster Pan speed. Pan speed is 0.5 seconds faster than

original Design Spot 250. Tilt speed will be the same as speed 2.

Mic Sensitivity

sensitive to sound. This function only works in conjunction with the sound active

modes. The default setting is 70% and setting range from 0% to 99%.

Hibernation - Standby mode; in this mode the lamp and stepper motors will power

off when the fixture does not receive a DMX signal for at least 15 minutes (Factory

default). When the fixture receives a new DMX signal it will reset and and return to

the last DMX position.

8.3.2

Service

Setting–

Password

- The Password for this function is "50".

RDM PID- With this function you can call up various submenus via RDM.

8.3.3 Fan Control – This function is used to change the functionality of the internal

cooling fans. The available selections are 10%, 30% and 50%.

8.3.4

Display Setting

Shutoff Time -The display is designed to turn off during normal operation to avoid

excessive light in situations that require an extremely dark environment. This

function will adjust the amount of time the display will remain on until it is automatic

turned off. This function is disabled as default.

Flip Display – This function will allow the entire display to be flipped by 180˚ to

allow for better view when the fixture is hung from truss or a ceiling. This function

– This function makes the internal microphone more or less

–

Platinum Wash Zfx Pro

™

Table of Contents