Whirlpool Rooper Service Manual page 51

10. With the hinge arm in the "broil stop" position,
install the new hinge assembly in the oven
door liner. Insert the arm into the slot, and
rotate the assembly into position. Hook the
tab at the top of the assembly into the slot in
the door liner, and secure the bottom with two
screws.
INSULATION
RETAINER
HINGE
ASSEMBLY
LEFT SIDE
TRIM
BOTTOM TRIM
HINGE
DOOR ARM
LINER
BOTTOM TRIM
BOTTOM VIEW
DOOR
INSULATION
BOTTOM TRIM
SIDE TRIM
SCREW (3)
REMOVE
THIS SCREW
Cooking Products Service Manual
Original
© 1996 Whirlpool Corporation
11. Using the bottom of your shoe, press down on
the hinge assembly arm that you just in-
stalled, and insert the screw or nail into the
hole in the arm.
12. Reassemble the rest of the door and install it
on the range.
HINGE
ASSEMBLY
RIGHT SIDE
TRIM
3-25
4321892
July, 1996
Page 3-25
DOOR LINER
INNER DOOR
GLASS