Playing A Multiplex Sound Cd; Viewing The Video Intro; Programming During Video Intro - JVC XL-MV7000GD Instructions Manual

Playing a multiplex sound CD

This function is used for multiplex sound discs.
See manuals attached to discs for detail information.
Operation
By pressing the MPX button consecutively, channel multiplexing
modes are cycled as shown below.
MPX
NORMAL L-CH MONO
(left-channel/
right-channel)
(Television screen)
When L-CH MONO or R-CH MONO is selected, the MPX button on
the player lights and the display indicates MPX L or MPX R
respectively.
* When playing back an SVCD;
STEREO 1 STEREO 2
MONO 4 MONO 3
(Television screen)
When any of MONO 1 through 4 is selected, the MPX button lights.
Note
• Note that you can hear no audible sound at the STEREO 2, MONO
3 and MONO 4 positions if no audio is recorded on STEREO 2.
MPX
or
(Remote control)
R-CH MONO
MONO 1
MONO 2
VARIOUS UNIQUE FUNCTIONS

Viewing the VIDEO INTRO

Preparation
When you play a Video CD or SVCD with the Playback Control
function, the PLAY MODE switch should be set to PBC OFF.
Operation
1. Play the disc you want to see a digest of.
2. Press the VIDEO INTRO button on the player or the remote
control just after starting disc play. Then, the player starts to
display in sequence the first several seconds and track num-
bers of all tracks on the disc.
VIDEO INTRO
3. To select a track during the video intro mode, press the
number key corresponding to the item number on the televi-
sion screen.
VIDEO INTRO
1
4
7
(Television screen)
Note
• The Video intro function is not available in the Random mode.

Programming during VIDEO INTRO

Operation
1. Stop play.
2. Press the PROGRAM button so that PROGRAM is lit in the
display.
3. Press the disc button you want to play, and enter 1 on the
number keys.
4. Press the 3 (PLAY)/SELECT button and then, after the disc
has started to play, press the VIDEO INTRO button.
5. The player starts to display in sequence the first several
seconds and track numbers of all tracks on the disc. Select the
numbers you want to program. You can program nine tracks.
6. Press the 3 (PLAY)/SELECT button to play.
VIDEO
INTRO
or
(Remote control)
2 3
5 6
8 9
Page 15