Stopping Play; Pausing Play; Skipping The Track; Manual Search - JVC XL-MV7000GD Instructions Manual

BASIC OPERATIONS

Stopping play

Press the 7 (STOP) button to stop play at any time.

Pausing play

Press the 8 (PAUSE)/STILL button to temporarily suspend play.
STILL
Notes
• When the 8 (PAUSE)/STILL button is pressed once, "PAUSE"
appears on the television screen, the video motion freezes and the
sound is turned off. The still picture advances frame-by-frame each
time the 8 (PAUSE)/STILL button is pressed. This frame-by-frame
function is available only for Video CDs and SVCDs.
• To release the pause, press the 3 (PLAY)/SELECT or blinking CD
1 through 3 button.
• During "PAUSE" the time counter on the display will blink.

Skipping the track

If the PBC function is not activated, you can skip track(s) by using
the 4 / ¢ buttons during play.
Pressing the 4 button skips the current track backward, while
pressing ¢ skips forward.
PREV NEXT
Page 8
or
(Remote control)
or
(Remote control)
or
(Remote control)

Manual search

During play, you can search the disc position by using the shuttle
dial, or 4 / ¢ buttons on the player or 4 / ¢ buttons on the
remote control unit.
Rotating the shuttle dial to the right causes the disc to play
forward quickly. Rotating it to the left causes it to play backward
quickly.
Holding down the 4 / ¢ buttons on the player or the 1 / ¡
buttons on the remote control unit causes the disc to play forward
or backward quickly.
Continuing to hold down the buttons causes it to search much
faster.
(Remote control)
Notes
• In some circumstances, this function is not available when the PBC
function is activated.
• The angle at which you hold the shuttle dial determines the manual
search speed.
BOOKMARK
B.SEARCH
2-1 1:30
B 3 3 – – – E M.SEARCH
(Television screen)