Tape Operations; Listening To A Cassette - JVC KS-FX732R Instructions Manual

Listening to a cassette

You can play back type 1 (normal) tapes.
1
Insert a cassette into the cassette
compartment.
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, select tape as the source by
pressing TAPE 23 to start tape play.
2
Select the tape direction.
TAPE
CD CHANGER CONTROL
TP/PTY
SEL
DISP
7 8 MO 9
The unit turns on and
tape play starts
automatically. When one
side of the tape reaches
its end during play, the
other side of the tape
automatically starts
playing. (Auto Reverse)
Each time you press
TAPE 23, the tape
direction changes to
forward ( ) and
reverse ( ) alternately.

TAPE OPERATIONS

DAB
10
11 RPT 12 RND
MODE
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The source
changes to the previously selected one.
If you change the source, tape play also stops
(without ejecting the cassette this time).
• You can eject the cassette while the unit is turned
off by pressing 0.
To fast-forward or rewind a tape
Press
1 second to fast-forward the tape.
¢
When the tape reaches its end, the
4
tape is reversed and playback starts
from the beginning of the other side.
Press 4
1 second to rewind the tape.
When the tape reaches its end,
playback of the same side starts.
To stop fast forward or rewind at any position
on the tape, press TAPE 23.
Tape play starts from that position on the tape.
Notes:
• When one side of the tape reaches its end during
play, the other side of the tape automatically starts
playing. (Auto Reverse)
• When the tape reaches its end while fast-forwarding,
the tape direction will be changed automatically.
TAPE
FM/AM ¢
SSM
4
CD-
CH
SCM
¢ for more than
for more than
17