Alphabetical Reference
•
Create Program
•
•
C-TC TLS port
•
•
•
Daylight Saving
•
•
Debug Interface
•
•
72
Consecutive good packets [in packets]: the good packets in succession
between two bad packets will be counted. If the number of counted
packets is less than the specified value, the threshold will be
exceeded.
– Valid values: 1 ... 255
– Default value
Page 109.
Page 64
Only on optiPoint 410/420 standard/advance in conjunction with a
display module or application module.
Once all required parameters have been entered, you can start to
create the program here.
Page 57
This entry is only available in the local telephone menu if TLS has been
selected for
Transport Base/Transport mode.
Enter the C-TC TLS port number.
Default value: 4061
Page 28
Page 65
This entry is only required if you selected "SNTP" in the
field.
Activate this field if you want the clock on your telephone to
automatically switch between daylight saving and standard time.
Page 67
Only required for development. However, this function can be used for
debugging customer systems in an emergency.
If this field is activated, the Windriver Tornado debugger makes contact
with the telephone and allows the software to be debugged.
Page 66
Time Source