Optipoint 410 Entry; Entering The Administration Area - Siemens HiPath 2000 Administration Manual

Step by Step
e d g

optiPoint 410 entry

After integrating the optiPoint 410 entry into your
network successfully
other settings via the "web-based management tool"
Page 51.

Entering the Administration Area

If you are in the administration area, you cannot
reach the optiPoint 410 entry ("offline").
All functions in this area are protected against illegal
access by a password.
Press keys simultaneously to enter the administration
area.
o
Enter the Administrator password
(default: 123456).
r
Complete entry.
You are now in the administration area (all LEDs flash).
View Settings
You can have the system display the most important
settings for your optiPoint 410 entry.
Switch to the administration area (see above).
Press the 2nd function key from the top.
o
Enter the 2-digit code (table
function.
r
Complete entry.
The settings are displayed through different illumination
of the LEDs.
The table on
LEDs.
Page 17, you can make all
Page 116) for the desired
Page 113 describes the meaning of the
Administration
39