No Activity Feature; Using The Panel Download Feature; System Information - GE Concord express User Manual

Only Latchkey-designated user codes can cause a Latch-
key page to be sent. By default, this includes the first 5
Regular User codes. If you'd like more user codes to be
included, contact your installer.
Preparing the system to send a Latchkey page:
‰ Arm the system, then press
briefly: "Pager on," or "LATCHKEY PAGER ON."
To send a Latchkey page:
‰ Latchkey-designated user disarms the system.
Users with pagers will receive a message containing
111 and the user code entered to disarm the system.
œÌi
If you have the Opening and Closing Reports feature
turned on, you'll receive a page every time someone
disarms the feature, not just Latchkey-designated
user codes.

No Activity Feature

The system can monitor the activity in your home and
automatically call for help if normal activities are not
detected within a defined period of time.
œÌi
This feature is not active in Level 3—AWAY.
For example, if someone falls and can't move, the system
will detect that normal activities, such as opening doors
and windows, have not occurred for a predetermined. No
Activity time.
The system sounds an auxiliary alarm to let you know
there may be a problem. If all is well, you can stop the
siren by disarming your system. If no one disarms the sys-
tem for 5 minutes, your system calls the central monitoring
station. The central monitoring station will send emer-
gency personnel to the premises to check out the situation.
Refer to the Appendix A User Sheets to see if the No
Activity feature is currently available to you and the dura-
tion of the No Activity setting. If the feature is not cur-
rently available to you, contact your installer.

Using the Panel Download Feature

To download to the panel is to replace the old information
in it with new information. Downloading is performed
only by your dealer using ITI software specifically
designed for this panel.
Turning the Download feature on allows the dealer remote
access to your panel in order to:
‰ Update your account.
‰ Back up data from your panel.
‰ Allow your dealer to quickly implement requested
programming changes.
6
. Touchpads display
To enable/disable the Panel Download setting:
1. Enter the programming menus by pressing
9
+ System Master Code.
2 0
2. Press + .
3. To turn Downloading:
2 ƒ
q
on, press +
access your system remotely if necessary.
1 ƒ
q
off, press +
access your system remotely.
‚ 4 ƒ
4. Press + + to exit the programming menus.

System Information

There is information about your system that is useful to
know. This includes the factory code, the system number,
and the system level.
After identifying the information for your system, make a
note of it in the Appendix A User Sheets.
To identify system information:
1. Enter the programming menus by pressing
9
+ System Master Code.
B
2. Press until the touchpad displays "System ID," or
SYSTEM VERSION," then press
q
The first information displayed is the factory
code. For example, "FACTORY CODE nnn *
nnnn," or "F nnn – nnnn."
B
q Press to display the system number. For exam-
ple, "N – nnnnnnn," or "SYSTEM NUMBER *
nnnnnnn."
B
q
Press to display the system level. For exam-
ple, "L nnnn," or SYSTEM LEVEL nnnn."
‚ 4 ƒ
3. Press + + to exit the programming menus.
No Activity Feature
. The dealer will be able to
. The dealer will not be able to
ƒ
.
13