Damper Operation / Tech Service - Desa (V)GM36 Installation Instructions Manual

36”, 42", 50" wood burning (herringbone ) masonry fireplace with insulation
Table of Contents

Advertisement

OUTSIDE AIR AND DAMPER HANDLE OPERATION
The damper handle, which opens and closes the damper blade,
is located in the upper front face of the fireplace. Pushing the
handle forward and up of the keyway slot will free the damper
blade to automatically open. Pushing the handle forward and
down will lock the damper blade closed (see figure 21).
Figure 21
DAMPER HANDLE
The outside air kit lever is located at the left and right hand
sides of the fireplace (see figure 22). Lifting the lever up will
free the outside air door to open. Pulling the lever down will
lock the door close.
WARNING: Risk of fire! Replace grate with DESA
model 109496-01 (GM50), 109496-02 (GM42), or
109496-03 (GM36) grate only.
designed to keep the operation of your fireplace safe
and efficient.
This grate has been
Figure 22
FOR
FURTHER
INSTRUCTIONS AND WARRANTY INFORMATION,
PLEASE REFER TO YOUR HOMEOWNERS GUIDE
OR CONTACT YOUR AUTHORIZED DEALER.
TECHNICAL SERVICE
You may have questions about installation, operations, or
troubleshooting.
Department at 1-866-672-6040. When calling, have the model
number of the fireplace ready.
-
-
12
OUTSIDE AIR KIT LEVER
OPERATING
If so, contact the Technical Service
For more information, visit www.desatech.com
GUIDELINES,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vgm42Vgm50hVgm42hVgm50Gm36Gm42 ... Show all

Table of Contents