GMC 2011 Canyon Owner's Manual page 19

Four-Wheel Drive
Four-wheel drive sends engine
power to all four wheels for extra
traction.
The transfer case buttons are
located to the right of the steering
wheel on the instrument panel.
Use these buttons to shift into and
out of four-wheel drive.
2 (Two-Wheel High): Use for
driving in most street and highway
situations.
{
WARNING
Shifting the transfer case to
N (Neutral) can cause the vehicle
to roll even if the transmission is
in P (Park). You or someone else
could be seriously injured. Be
sure to set the parking brake
before placing the transfer case
in N (Neutral). See Parking Brake
on page 9 47.
I n f o r ma t i o n P r o v i d e d b y :
In Brief
N (Neutral): Use the N (Neutral)
position only when towing the
vehicle. See Recreational Vehicle
Towing on page 10 94.
4 (Four-Wheel High): Use when
extra traction is needed in most
off-road situations.
4 (Four-Wheel Low): Use this
position to deliver extra torque to
all four wheels. Used for extreme
off road conditions. See Four-Wheel
Drive on page 9 42.
1-13