GMC 2011 Canyon Owner's Manual page 162

2011 gmc canyon
Hide thumbs Also See for 2011 Canyon:
Table of Contents

Advertisement

7-12
Infotainment System
Finding an XM Channel
BAND: Press to switch between
FM1, FM2, AM, or XM1 or XM2
(if equipped). The selection
displays.
DISPL (Display): Press to
retrieve four different categories
of information related to the
current song or channel: Artist,
Song Title, Category or PTY,
Channel Number/Channel Name.
TUNE
: Turn to select XM
Channels.
SEEK
: Press to go to the
previous or next channel and stay
there.
SCAN
: Press and hold for
more than two seconds, SCAN
displays and the radio beeps once.
The radio goes to a channel, plays
for a few seconds, then goes to the
next channel. Press
or
to stop scanning presets.
To scan preset channels, press
and hold
or
four seconds, PSCN displays and
the radio beeps once. The radio
goes to a preset channel, plays for a
few seconds, then goes to the next
preset channel. Press
to stop scanning presets.
Setting Preset Channels
If the radio has XM, up to
30 stations (6 FM1, 6 FM2,
6 AM, 6 XM1, and 6 XM2)
can be programmed on the
six numbered pushbuttons.
To program either radio:
1. Tune in the desired channel.
2. Press and hold one of the
six numbered pushbuttons until
the radio beeps once. When that
numbered pushbutton is pressed
again, the channel that was
again,
stored, returns.
3. Repeat the steps for each
pushbutton.
I n f o r ma t i o n P r o v i d e d b y :
XM Radio Messages
for more than
XL (Explicit Language
Channels): These channels, or
any others, can be blocked at a
customer's request, by calling
1-800-929-2100 in the U.S. and
or
again,
1-877-438-9677 in Canada.
Updating: The encryption code
in the receiver is being updated,
and no action is required. This
process should take no longer than
30 seconds.
No Signl: The system is
functioning correctly, but the
vehicle is in a location that is
blocking the XM signal. When the
vehicle is moved into an open area,
the signal should return.
Loading: The radio system is
acquiring and processing audio and
text data. No action is needed. This
message should disappear shortly.
Off Air: This channel is not
currently in service. Tune to
another channel.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents