Hood; Engine Cover - Winnebago 2003 adventurer Owner's Manual

Table of Contents

Advertisement

SECTION 9
CARE & MAINTENANCE
The 3000-mile oil life counter on the engine
controller will be reset to start a new cycle.
ENGINE ACCESS - Ford or Work-
horse Chassis

HOOD

The hood latches are located behind the bot-
tom edge of the hood panel near both ends of the
grille. Squeeze or pull both latch handles at the
same time toward the hood panel to release the
latches. Then pull the hood panel outward slight-
ly and lower it into the open position. Do not let
the hood drop.
Squeeze latch handles toward hood panel and
lower hood down into open position.
To close the hood, lift and swing inward. Press
bottom edge of hood panel inward firmly with
palms of your hands to ensure proper latching.
With the hood open, the engine oil dipstick,
oil fill, radiator fill, power steering reservoir and
windshield washer reservoir are accessible.
9-8
Engine Coolant
Engine Oil
Reservoir
Fill
Windshield Washer
Fluid Reservoir
Power Steering
Fluid Reservoir
ENGINE COVER (Ford or Workhorse
Chassis)
· Insert the supplied hex wrench into the hole
in the rear top or edge of the engine cover.
Unlatch
Transmission
Fluid Dipstick
Engine Oil
Dipstick
Brake Fluid
Reservoir

Advertisement

Table of Contents
loading

Table of Contents