Gaggia Platinum swing up Operation And Maintenance Manual page 51

10
Re-assemble all the covered
components. Replace the
emulsifying group onto the jug.
Warning: make sure that the
cover is correctly inserted in the
tube located inside the jug.
13
At this point, fi rmly press so as to
join both parts.
Clean the connector with a damp cloth. For thorough cleaning, fi ll the clean jug with water and dispense steam
(follow the instructions from point 2 to point 6 at page 15).The jug and the emulsifying group's components may be
washed in a dish-washer for home use.
11
Assemble the handle.
Place the upper part as shown in
the fi gure.
14
The milk jug is now assembled
and ready for use.
12
Keep the upper part in contact
and insert the lower part of the
handle.
Warning: only use the milk
jug if intact and if all com-
ponents are correctly instal-
led.
17