INSTALLING
Continued
103281
4. Place the crossover log (#5) on the back log and the top middle log. Make sure the peg
on the rear log is in the hole in the bottom of the crossover log. The crossover log
should fit in the cutout of the top middle log (see Figure 25).
Cutout
Figure 25 - Installing Crossover Log (#5)
You must operate this fireplace with the fireplace screen in place.
Make sure fireplace screen is in place before running fireplace.
5. Install fireplace screen by slipping notches of fireplace screen over screws on
front of fireplace (see Figure 26).
Notches
Figure 26 - Installing Fireplace Screen
Crossover
Log (#4)
Hole
Peg
WARNING
WARNING ICON
G 001
Screws for
Mounting
Screen
21