Samsung SDS-P3042 User Manual page 13

Changing the remote Control Id
1. Press the [Id] button of the remote control and check the ID displayed on the DVR screen.
The factory default ID of the remote control is 00.
2. Enter 2 digits of your selection in order, while pressing the system [Id] button.
3. When ID input is done, press the system [Id] button again to check the setting.
If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed.
`
M
Remote control's ID and DVR's ID should be matched for proper operation. Refer to "Remote Devices". (Page 50)
English _13