Radio Operations; Listening To The Radio - JVC Cassette Receiver KS-FX433R Instructions Manual

RADIO OPERATIONS

Listening to the radio

1
1
/I
ATT
2
A M
AM
3
SSM
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency manually:
1 Select the band (FM or AM).
Press FM or AM.
2 Press and hold
Now you can manually change the frequency while "M" is flashing.
3 Press or
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9 kHz intervals for AM — MW/LW) until you release the button.
4
3
Note on One-Touch Operation:
When you select a band in step 2 below, the power automatically comes on. You
do not have to press this button to turn on the power.
F M
FM1 FM2
FM3
Note:
When a cassette is in the cassette compartment, you cannot select the tuner. Be
sure to eject the cassette from the cassette compartment to listen to the radio.
To search stations
of higher
frequencies.
To search stations
of lower
frequencies.
or until "M" starts flashing on the display.
repeatedly until the frequency you want is reached.
2
Turn on the power.
Select the band (FM1, FM2, FM3 or
AM).
You can select any one of FM1, FM2, and FM3
to listen to an FM station.
Start searching a station.
When a station is received, searching stops.