Error Messages; Status Display - Philips SM40 Instructions For Use Manual

4. OPERATING AND PROGRAMMING THE SM40 SYSTEM
4.3.2

Error Messages

Status / Action Result / Remarks
The SM40 system continuously monitors to see whether all cards and Call Stations
are still connected and communicating with the CPC. If, for some reason, a card is
not communicating with the CPC; a Call Station is disconnected or a Call station's
detection current exceeds the limit, one of the following messages will be displayed.
Note: These messages will not be displayed when them SM40 system is in
programming mode or in status display mode.
* * * * ERROR * * * *
CALL/ALARM STATION XX
* * * * ERROR * * * *
INPUT CARD XX
* * * * ERROR * * * *
MATRIX CARD XX
* * * * ERROR * * * *
GENERATOR CARD XX
* * * * ERROR * * * *
LOCKED CONTROL RELAY CARD XX
* * * * ERROR * * * *
UNLOCKED CONTROL RELAY CARD XX
* * * * ERROR * * * *
MESSAGE SWITCH CARD XX
* * * * ERROR * * * *
DIGITAL MESSAGE CARD XX
4
4-17