Recline Angle Indicators
• Correct recline angle is acheived when the green marker on
each recline angle indicator is visible between the two lines.
• Vehicle must be parked on a level surface.
LATCH Connectors
• Push and hold the LATCH
connector release button
to remove the LATCH
connectors from the
storage slot in the base
or from the seat when
installed.
• To store the LATCH
connectors, push the lower
connector into the storage
slot in the base until they
click into place.
NOTE:
* LATCH connectors should
always be stored in the
base when not in use.
Installing the Base
13