Table of Contents
Advertisement
Other convenient tape
functions
Skipping blank portions on the tape
You can skip blank portions between the tunes
(Blank Skip).
1 Press MODE repeatedly until
2 Press SEL (select).
When this function is on, the B.SKIP indicator
lights up on the display and the unit skips blank
portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.
Playing the current tune repeatedly
You can play the current tune repeatedly
(Repeat Play).
1 Press MODE repeatedly until
2 Press SEL (select).
24
"B.SKIP" appears.
DOLBY B
B.SKIP
REPEAT
Canceled
Each time you press the
button, skip function mode
turns on ("B.SKIP ON") and
off ("B.SKIP OFF")
alternately.
"REPEAT" appears.
DOLBY B
B.SKIP
REPEAT
Canceled
Each time you press the
button, repeat play mode
turns on ("REPEAT ON") and
off ("REPEAT OFF")
alternately.
Notes:
In the following cases, Blank Skip and Repeat Play
may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
tunes.
– The Dolby NR setting does not match. For example,
if the tape is recorded with the Dolby C NR.
Prohibiting tape ejection
You can prohibit the tape ejection and can lock a
tape in the cassette compartment.
While pressing TAPE/AUX, press
and hold TAPE 0 for more than
2 seconds. "TAPE
on the display for a while, and
the tape is locked and cannot be
ejected.
To cancel the prohibition and unlock the tape,
press and hold TAPE 0 for more than 2 seconds
again, while pressing TAPE/AUX.
"EJECT OK" flashes on the display for a while,
and the tape is unlocked.
" flashes
Advertisement
Table of Contents
