Finding The Beginning Of A Tune - JVC LVT1099-001A Instruction Manual

To stop play and eject the cassette
Press TAPE 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment.
If you change the source, the tape play also
stops (without ejecting the cassette this time).
• You can also eject the cassette by pressing TAPE 0
while the unit is turned off.
To fast-forward and rewind a tape
Press ¢
1 second to fast-forward the
tape.
When the tape reaches its
end, the tape is reversed
and playback starts from the
beginning of the other side.
Press 4
1 second to rewind the tape.
When the tape reaches its
end, playback of the same
side starts.
To stop fast-forward and rewind at any
position on the tape, press 2 PROG 3.
Tape play starts from that position on the tape.
Note:
When the tape reaches its end while fast-forwarding,
the tape direction will be changed automatically.
Finding the beginning of a
tune
Multi Music Scan allows you to automatically
start playback from the beginning of a specified
tune. You can specify up to 9 tunes ahead or
before the current tune.
During playback
1
for more than
for more than
When the beginning of the specified tune is
located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback
starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is
reversed and played from the beginning of the
other side.
• In the following cases, Multi Music Scan may not
operate correctly:
– Tapes with tunes having long pianissimo
passages (very quiet parts) or non-recorded
portions.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
tunes.
– The Dolby NR setting does not match. For
example, if the tape is recorded with the Dolby C
NR.
Specify where (how many tunes
ahead of or before the current tune)
the tune you want is located.
To locate a tune ahead
of the current tune on
the tape
To locate a tune before
the current tune on the
tape
Each time you press the button, the
number changes up to ±9.
23