Download Print this page

Pioneer DV-533 Operating Instructions Manual page 60

Pioneer dvd players operating instructions
Hide thumbs Also See for DV-533:

Advertisement

Some settings
in the Setup Menu do not appear.
I)
The Setup Menu Mode is set to [Basic]; set it to
[Expert] (page 25).
Audio is not output
or is distorted.
The Setup screen Audio 1 menu [96 kHz PCM Out1
setting IS set to [96 kHz1.
*
Either connect usrng the analog outputs, or set
[96kHz PCM Out] in the Audio 1 menu to [96kHz
b 48 kHz1 (pages 15, 27).
The drsc IS drrty.
I)
Refer to 'Disc Care'(page 56).
The connection plugs are not inserted fully into the
terminals or are not connected.
+
Check that all connection plugs are firmly inserted
The connection plug or terminal is dirty.
+
Check that the plugs and terminals are wiped
clean of dirt, etc.
Audro cable connection is wrong.
*
Check to make sure that the audio cables are
connected correctly (page 15).
Connection is made to the stereo amplifier's PHONO
input terminal.
+
Change connection to any input terminal except
PHONO.
The pause mode is engaged.
I)
Press PLAY ) or PAUSE II to exit the pause
mode.
Stereo amplifier operation is incorrect.
+
Check input (CD, AUX, etc.) selector to determine
if it is selected for DVD playback.
Noticeable
difference
in DVD and CD volume.
DVDs and CDs use different recording methods.
+
This is not a malfunction.
No DTS audio output.
+
You can only play DTS discs if you have a DTS-
compatible amplifier or a DTS decoder. From the
disc menu screen, or using the AUDIO button,
select a non-DTS setting (pages 21,34).
4
If this unit is connected to a non-DTS compaible
amplifier or decoder using a digital audio cable, set
[DTS Out] to [Off] in the Setup menu. If you do
not do this, noise will be output if you try and play
a DTS disc (page 27).
+
If this unit is connected to a DTS-compatible
amplifier or decoder using a digital audio cable,
check the amplifier settings, and that the cable is
properly connected (page 15).
"DTS DIGITAL OUT OFF" is displayed
on-screen.
If this unit is connected to a DTS-compatible
amplrfrer or decoder, set [DTS Out] and [Digital
Out] to [On] from the Setup menu (page 27). If you
do not have a DTS-compatible
amplifier or decoder,
you cannot play DTS discs. In this case, select a non-
DTS setting from the disc menu or by using the
AUDIO button (pages 21,341.
The disc containing
the MP3 tracks won't play.
If the disc is a recordable CD, make sure that the disc
is finalized. If the message "UNPLAYABLE
MP3
FORMAT"
is displayed when you try to play a disc/
track:
*
Check that the track(s) are in the MPEGI Audio
Layer 3 format.
*
Check that the sampling rate of the track(s) are
44.1 or 48kHz.
Some MP3 tracks appear to be missing from a disc.
+
If a track name does not end in ".mp3" or
".MP3",
this player will not recognize It as an MP3
track.
*
This player only recognrzes the first 250 folders
and tracks on a disc. If there are more folders/
tracks than this, you will not be able to play them.
I)
This player is not compatible with multi-session
discs. If the disc is multi-session, you will only be
able to play tracks recorded onto the first session.
The audio recorded on the disc is not output
properly.
I)
If the audio is switched to 121 when playing a
Super VCD that contains only one stereo
soundtrack, there may be no sound at all. To
restore the sound, return the AUDIO button back
to its original position (page 35).
There is a howling
or high-pitched
sound from the
speakers when using the karaoke function.
(DV-533K
only)
The mic is too close or pointing towards the speakers.
+
Try to keep the mrc pointed away from the
speakers.
I)
Turn down the volume on the mic.
Karaoke functions
are not possible.
(DV-533K only)
A mic is not connected to the player or is not turned
on.
+
Check that a mrc
IS
connected to the player. If the
mic has an on/off switch, check that the mic is
switched on.
The mic volume
IS
turned down all the way.
I)
Adjust the mic volume so that vocals can be
heard.
Caution
Static electricity or other external influence may cause
malfunctioning
of this unit. In this cas&, unplugging
the power cord and then re-plugging it'in will usually
reset the unrt for proper operation. If this does not
correct the problem, please consult your nearest
PIONEER service center.
60
En

Advertisement

loading

This manual is also suitable for:

Dv-533kDv-440