Pioneer DV-533 Operating Instructions Manual page 11

0 CONTROL IN jack
Use to connect this player to another component
bearing the Proneer m mark. This lets you control
thus unit as though it were a component in a system.
Player operations are then performed by pointing the
remote control at the component that the player is
connect to
(page 16).
@ COMPONENT VIDEO OUT jacks
If your TV or monrtor has component video inputs,
you can produce a higher quality picture on your TV
or monitor by connecting to the component video
outputs on this unit
(page 16).
@ AUDIO OUT jacks
Use to output two-channel audio (analog) to the
audio stereo inputs on a TV or stereo amplifier. If you
are connecting to a receiver that has both digital and
analog input jacks for DVD player connection, it may
be beneficial to make both connections
(pages 14,
15).
@ AC IN power cord connection terminal
Use to connect the power cord to the wall outlet
(page 14).
@ S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear
picture reproduction is possible by connecting the
player to your TV or monitor via the S-Video jack
(page 16).
You can switch between
[Sl]
and [S21 S-video
output from the Setup menu
(page 30).
@ VIDEO OUT jack
Connect to the video input on a TV or monitor or AV
amplifier or receiver with video input capability
(pages 14,161.
0 DIGITAL OUT OPTICAL jack
Use to output the digital audio signal recorded on
discs. You can output the digital signal via the optical
output jack to an AV amplifier or receiver
(page 15).
@ DIGITAL OUT COAXIAL jack
Use to output the digital audio signal recorded on
discs. You can output the digital signal via the coaxial
output jack to an AV amplifier or receiver
(page 15).
11
Fn