Pioneer DV-533 Operating Instructions Manual page 24

The procedure on this page describes how to operate the
menus on the Setup screen. These menus are used to
set and adjust a number of system settings. The various
functions that can be adjusted are covered throughout
this manual. The procedure on this page provides a basic
outline for using the Setup screen menus.
When setting up for the first time
It is recommended to set up player using the Setup
Navigator (page 17). If you selected [Auto Start Off1
when the Setup Navigator appeared, you may still set up
the player using the Setup Navigator in the General menu
screen.
If you choose not to use the Setup Navigator, be sure to
make the necessary settings in the Setup screen
Audio 1, Audio 2, Video 1, Video 2 and Language
menus as described on the following pages.
Some DVDs start playing automatically when loaded in
the player. If a DVD has been loaded, be sure to press
STOP M before proceeding.
___~~~~-,,~,~, _,,~ -~-r ,~~*<,,*~,~,~,,- ~~,~,~~-~,"~~~~,~--,-
1
Press (1, (0 STANDBY/ON on the front
panel).
-~~~~~-~,,~~,~~-~-~-~,-,-~~~.~~~-__1 -m
2 Press SETUP.
The Setup screen appears.
3 Use the cursor buttons (+/,I to select the
menu you want.
As each menu is selected with the cursor, the
settings appear below the menu heading,
'-a w __ _a,' X^/< ,_ I
4 Use the cursor buttons (~1 to enter the
menu.
The top item within the menu becomes highlighted.
Examale
MPEG Out - MPEG . PCM
0 Change Dolby Digital output mode
!
5 Use the cursor buttons (A/V) to select the
setting you want to change.
The optrons available for each setting appear to the
right when the setting is selected. The current
setting appears with the setting indicator lit.
6
Use the cursor buttons (,I to enter the
setting options.
Example
1 @Output Dolby DIgital
l
Not all menu options can be changed whrle a disc
IS playing. In these cases, the options appear
grayed out on the screen and cannot be adjusted.
To change these settings, press STOP W first
before pressing SETUP.
l
Operatrng the menu after pressrng STOP
n
may
cancel the resume function.
l
Some menu options are not Immediately
effectrve if set while a disc is playing. To make
these settings effectrve, stop playback and then
start again, or change the settings whrle the disc
IS stopped.
24
En