Pioneer DV-533 Operating Instructions Manual page 25

. . . .^_.
7 Use the cursor buttons (A/V) to select a
new setting and press ENTER to set the
new setting in memory. Press RETURN or
the cursor button (4) to exit the options
without making any changes.
I. ___ .
8
Press RETURN or the cursor button (4 to
go back to the main menu bar to select
another menu.
9 Press SETUP to close the Setup screen.
The Setup screen closes.
Note
The next trme you press SETUP, you'll see the menu screen
that you exrted from last time.
How to interpret the setting indicator colors in
the Setup screen menus
When setting up the system, or when making
adjustments, it is convenrent to know what settrngs are
applicable to the drfferent disc formats. When the
settings appear for each menu optron. the currently
selected setting appears with the setting Indicator
highlighted In one of three colors: blue, green or yellow.
These colors correspond to what formats the menu
optron effects as shown in the table below.
Color of indicator Disc format(s)
Blue DVD only
Yellow DVDlSuper VCD/Video CD
Green All compatible formats
Notes
l
If a settrng applrcable only to DVDs is changed whrle a
Super VCD/Video CD or CD is loaded, a blue DVD icon
appears rn the upper right hand corner of the screen to
Indicate that the settrng IS not applicable to the currently
loaded disc. The settrng wrll be effectrve the next trme a
DVD IS loaded.
l
The blue rndrcator IS shown for the [TV Screen]. but the
aspect can be switched for Super VCD.
The Setup screen menus are divided into two levels,
[Basic] and [Expert], to make this unit more convenient
to operate for different levels of users. The [Basic]
menu mode contains functions that may be considered
necessary for the basic operations of this player and
helpful on-screen information identified by the @ mark.
The [Expert] menu mode adds to the [Basic] menu
mode additional functions of the player that can be
adjusted to further personalize performance of the
player.
In this manual, functions that are contained in the
[Expert] menu mode are identified by them icon.
Make changes to the
[Setup Menu Model
setting in the
Setup
screw
General s73entl.
Note
On-screen InformatIon only appears rn the [Basic]
menu mode.
=!
E
b
25
FP