JVC KD-SH1000 Instructions Manual page 181

C
Speaker connections for 3-way network speaker system /
You can enjoy a world of "pure audio" in your car by connecting 3-way network speaker system
(high-range/mid-range/subwoofer).
IMPORTANT:
If you have installed the 3-way network speaker system in the car, make sure of the
following.
• Connect the speaker system as illustrated below.
• Before using the system, activate crossover network and preset the appropriate cutoff frequencies for
HPF/LPF (especially for HPF); otherwise, it may damage the speakers.
• For details about the setting, see pages 18 and 19 of the INSTRUCTIONS.
When connecting the speakers (high-range/mid-range) through the speaker output
Left high-range speaker
Left mid-range speaker
Remote lead (Blue with white stripe)
To subwoofer out
To LINE OUT (REAR)
LINE OUT (REAR)
To LINE OUT (FRONT)
LINE OUT (FRONT)
*
3 Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the
wire). Failure to do so may cause damage to the unit.
* 3
White
White with black stripe
Green
Green with black stripe
Y-connector (not supplied for this unit)
Y
When connecting the speakers (high-range/mid-range) through the external amplifiers—to
obtain more powerful sound
Left high-range speaker
Left mid-range speaker
•
•
HPF
• 18 19
Gray with black stripe
Purple with black stripe
Connecting subwoofer /
—
JVC Amplifier
JVC
JVC Amplifier
JVC
5
HPF/LPF
Gray
Right high-range speaker
Purple
Right mid-range speaker
Remote lead
Subwoofer
JVC Amplifier
JVC
Right high-range speaker
Right mid-range speaker
*
4 Signal cord (not supplied for this unit)
* 4