Page 1 Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS KD-SH1000 KD-SH1000 KD-SH1000 For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet.
Page 2 CAUTION: CAUTION: • Your preset adjustments will also be erased. • If this does not work, reset your unit. • Be careful not to drop the disc when it ejects.
Page 3 CONTENTS...
Page 4 When using the remote controller...
Page 5: Control Panel
Control panel ∞ ¢ DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting).
Page 6 Remote controller — RM-RK300 ∞...
Page 7: Getting Started
∞ 5 ∞ 4 ¢ 8 4 ¢ ∞ * 5 : Returns to the previous menu. ∞ : Confirms the selection. Getting started Ÿ FM/AM = SIRIUS*/XM* = CD* = SD* = USB* = CD-CH* iPod* D. player* EXT-IN = LINE-IN = * You cannot select these sources if they are not ready or not connected.
Page 8 Radio operations Ÿ...
Page 9 5 ∞ Continued on the next page...
Page 10 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station When using the remote controller Directly select the preset number.
Page 11 Disc/SD card/USB memory operations * If you have changed the external input setting to “Ext In” (see page 22), you cannot select the CD changer. Ÿ SD loading slot SD card Continued on the next page...
Page 12 ⁄ Ÿ USB input terminal USB memory...
Page 13 * Selectable only when the source is “CD-CH.” * Appears only for MP3/WMA/SD/USB. Ex.: When “Folder” is When using the remote controller Current folder selected in step...
Page 14 Track Folder* Disc* Track Folder* Disc* Folder* Disc All* * Only while playing a media (MP3/WMA/SD/ USB). * Only when the source is CD-CH. * Only when the source is CD-CH, SD, or USB.
Page 15: Sound Adjustments
Sound adjustments Defeat (No acoustic effect is applied), Theater, Hall, Club, Dome, Studio, V.Cancel (Voice Cancel: Reduces the vocal sounds. Good for mastering your favorite songs— Karaoke.) Ÿ Go to step !. Ÿ * Appears only when “4ch” is selected in step Continued on the next page...
Page 18 Ÿ ⁄ Ÿ * Appears only when crossover network is activated (see left column). ⁄ • • Ÿ...
Page 20 General settings — PSM...
Page 21 Indications Items Sirius ID Scroll Once Auto Dimmer Auto • Time Set • • • Bright 1 10 ID3 Tag • • Theme Large • Small • IF Band Auto • Wide • Area • • • Displayed only when SIRIUS Satellite radio or XM Satellite radio is connected. Displayed only when “Clock Adj”...
Page 22 Indications Items Beep Ext In Changer Ext In Muting 1/ Muting 2 Amp Gain High PWR Low PWR Displayed only when one of the following sources is selected—FM, AM, CD, SD, USB, or LINE-IN. Settings, [reference page]...
Page 24: Title Assignment
Title assignment Sources Maximum number of characters * You cannot assign names to any discs other than conventional CDs. Select the sources. Enter the TITLE menu (see page 4). Assign a title. Select a character set. Á Finish the procedure. To erase the entire title = á...
Page 25: Satellite Radio Operations
Satellite radio operations • • • Listening to the satellite radio Activate your SIRIUS subscription after connection: Activate your XM subscription after connection:...
Page 26 Listening to the SIRIUS Satellite radio Listening to the XM Satellite radio Searching for category/channel...
Page 27 Checking the XM Satellite radio ID Storing user channels in memory Listening to a user preset channel...
Page 28 Selecting a category/channel on the list Selecting a category from the list Enter the MODE menu (see page 4). Select “Category.” Select a category you want. • You can move to the other lists by turning the control dial. Finish the procedure. The first channel of the selected category is tuned in.
Page 29 iPod®/D. player operations Caution: Preparations: Ÿ ⁄ To pause playback To fast-forward or reverse the track To go to the next or previous tracks or stop...
Page 30 Selecting a track from the menu 5 ∞ 4 – – For iPod: Playlists Ô Artists Ô Albums Ô Songs Ô Genres Ô Composers Ô For D. player: Playlist Ô Artist Ô Album Ô Genre Ô Track Ô ¢ Selecting the playback modes ¢...
Page 31 Other external component operations LINE-IN : EXT-IN : Ÿ Turn on the connected component and start playing the source. Adjust the volume. ⁄ Adjust the sound as you want. (See pages 15 – 19.) Maintenance How to clean the connectors Connector Moisture condensation How to handle discs...
Page 32: More About This Unit
To keep discs clean To play new discs How to handle SD card Warped disc Sticker More about this unit Basic operations Turning on the power Turning off the power Tuner operations Storing stations in memory Sticker residue Stick-on label Disc/SD card/USB memory operations Caution for DualDisc playback...
Page 33 General Playing an MP3/WMA discs Inserting a disc Playing a CD-R or CD-RW...
Page 34 Playing MP3/WMA tracks from an SD card or a USB memory...
Page 35 Changing the source Ejecting a disc Sound adjustments Selecting the DSP modes—DSP Storing your own sound modes Setting the sound modes—SEL General settings — PSM...
Page 36 Title assignment Satellite radio operations iPod® or D. player operations Notice: For iPod users: For D. player users:...
Page 38 Troubleshooting...
Page 41 • • • •...
Page 42 Specifications Ω ≤ Ω...
Page 43 Design and specifications are subject to change without notice. If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.
Page 44 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR © 2006 Victor Company of Japan, Limited 0206DTSMDTJEIN...
Page 45 KD-SH1000 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement GET0364-002A ENGLISH WARNINGS • • • Ω Ω • • • • ESPAÑOL ADVERTENCIAS • • • Ω Ω • • • • 0206DTSMDTJEIN EN, SP, FR © 2006 Victor Company of Japan, Limited FRANÇAIS...
Page 46 INSTALLATION (IN-DASH MOUNTING) INSTALACION (MONTAJE EN EL TABLERO DE INSTRUMENTOS) × × × × × × INSTALLATION (MONTAGE DANS LE TABLEAU DE BORD) × × × × × ×...
Page 47 ELECTRICAL CONNECTIONS CONEXIONES ELECTRICAS LINE IN RACCORDEMENTS ELECTRIQUES...
Page 48 JVC Amplifier JVC Amplificateur JVC Amplifier JVC Amplificateur JVC Amplifier JVC Amplificateur...
Page 49 JVC Amplifier JVC Amplificateur JVC Amplifier JVC Amplificateur JVC Amplifier JVC Amplificateur...
Page 50 JVC DLP JVC CD changer Processeur DLP JVC Changeur de CD JVC JVC DLP JVC CD changer Processeur DLP JVC Changeur de CD JVC External component Appareil extérieur External component Appareil extérieur XMDirect Universal Tuner Box Tuner universel XMDirect XMDirect...
Page 51 CD RECEIVER For canceling the display demonstration, see page 8. For installation and connections, refer to the separate manual. INSTRUCTIONS KD-SH1000 KD-SH1000 GET0365-001A [U/UH]...
Page 52 IMPORTANT FOR LASER PRODUCTS CAUTION: CAUTION: Warning: Caution on volume setting: Notice: How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • If this does not work, reset your unit. •...
Page 53 CONTENTS Basic operations ... 7 Playing a disc in the unit ... 11 Playing discs in the CD changer ... 11 Playing from an SD card ... 11 Playing from a USB memory ... 12 Selecting the DSP modes (DSP) ... 15 Using the equalizer—EQ ...
Page 54 When using the remote controller...
Page 55 Control panel ∞ ¢ DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting).
Page 56 Remote controller — RM-RK300...
Page 57: Basic Operations
∞ • Changes the preset stations. • folders. • – Pauses/stops or resumes playback with ∞. – Enters the main menu with 5. (Now 5/∞/4/¢ work as the menu selecting buttons.)* Adjusts the volume level. • Selects the preset station if pressed, or store a station if pressed and held.
Page 58: Radio Operations
To drop the volume in a moment (ATT) To turn off the power Basic settings Enter the PSM menu (see page 4). Canceling the display demonstrations Setting the clock Finish the procedure. To check the current clock time while the power is turned off Radio operations Ÿ...
Page 59 To restore the stereo effect, Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) Enter the MODE menu (see page 4). To tune in to all receivable stations, Storing stations in memory FM station automatic presetting — SSM (Strong-station Sequential Memory) Select the FM band (FM1 –...
Page 60 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station When using the remote controller Directly select the preset number.
Page 61 Disc/SD card/USB memory operations Ÿ SD loading slot SD card...
Page 62 ⁄ Ÿ USB input terminal USB memory...
Page 63 To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) Other main functions Selecting a disc/folder/track on the list Enter the MODE menu (see page 4). Select a list type. * Selectable only when the source is “CD-CH.”...
Page 64 Prohibiting disc ejection After making sure “No Eject?” is selected... To cancel the prohibition, Selecting the playback modes Enter the MODE menu (see page 4). Select one of the playback modes. Select one of the items (see the following table) Finish the procedure.
Page 65 Sound adjustments Selecting the DSP modes (DSP) DSP modes Defeat (No acoustic effect is applied), Theater, Hall, Club, Dome, Studio, V.Cancel (Voice Cancel: Reduces the vocal sounds. Good for mastering your favorite songs— Karaoke.) Enter the DSP menu (see page 4). Ÿ...
Page 66 Select the distance between the selected speaker and the seat. To change the measuring unit Repeat steps 4 and 5 to adjust the distance for the other speakers. Finish the procedure. Enter the BBE menu (see page 4). Select the effect level. Finish the procedure.
Page 67 Select a sound mode. Select a frequency band. Adjust the enhanced level for the selected frequency band. Repeat steps 2 and 3 to adjust the other frequency bands. Select one of the user modes. Store the adjustments. Enter the EQ menu (see page 4). Select a band.
Page 68 If you have installed the 3-way network speaker system in the car, make sure of the following: While the power is turned off... Ÿ To cancel the procedure, ⁄ Finish the procedure. To cancel Crossover, Enter the SEL menu (see page 4). Ÿ...
Page 70 General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Enter the PSM menu (see page 4). Select a PSM item. • • • • Select or adjust the selected PSM item. Repeat steps 2 and 3 to adjust the other PSM items if necessary.
Page 71 Indications Items Bright 1 10 ID3 Tag • • Theme Large • Small • IF Band Auto • Wide • Beep Ext In Changer Ext In Muting 1/ Muting 2 Amp Gain High PWR Low PWR Some characters or symbols will not be shown correctly (or will be blanked) on the display. Displayed only when one of the following sources is selected—FM, AM, CD, SD, USB, or LINE-IN.
Page 72 Selecting timer for the dimmer You can dim the display at night or as you set the timer. Select “Dimmer” from the PSM menu. Select “Time Set.” Adjust the dimmer time. Set the dimmer start time. : [0 – 23] 24Hours : [1A (1AM) –...
Page 73 Title assignment Sources Maximum number of characters * You cannot assign names to any discs other than conventional CDs. Á To erase the entire title = á...
Page 74 iPod®/D. player operations Caution: Preparations: Ÿ ⁄ To pause playback To fast-forward or reverse the track To go to the next or previous tracks * For iPod * For D. player or stop...
Page 75 Selecting a track from the menu Enter the main menu. Now the 5/∞/4 /¢ work as the menu selecting buttons*. * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track.
Page 76 Other external component operations LINE-IN : EXT-IN : Ÿ Turn on the connected component and start playing the source. Adjust the volume. ⁄ Adjust the sound as you want. (See pages 15 – 19.) Maintenance How to clean the connectors Connector Moisture condensation How to handle discs...
Page 77 To keep discs clean To play new discs How to handle SD card Warped disc Sticker Sticker residue Stick-on label More about this unit Basic operations Turning on the power Turning off the power Tuner operations Storing stations in memory Disc/SD card/USB memory operations Caution for DualDisc playback Continued on the next page...
Page 78 General Inserting a disc Playing a CD-R or CD-RW Playing an MP3/WMA discs * The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 313 or more.
Page 79 Playing MP3/WMA tracks from an SD card or a USB memory Changing the source Ejecting a disc Continued on the next page...
Page 80 Sound adjustments Selecting the DSP modes—DSP Storing your own sound modes Setting the sound modes—SEL General settings — PSM Title assignment iPod® or D. player operations Notice: For iPod users: For D. player users:...
Page 82 Troubleshooting...
Page 84 Symptoms Remedies/Causes...
Page 85 Symptoms • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • SD logo is a trademark. • Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
Page 86 Specifications...
Page 87 Design and specifications are subject to change without notice.
Page 88 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit EN, TH © 2006 Victor Company of Japan, Limited 0206DTSMDTJEIN...
Page 89 • Be sure to ground this unit to the car’s chassis again after installation. Notes: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio dealer. • It is recommended to connect to the speakers with maximum power of more than 50 W (both at the rear and at the front, with an impedance of 4 Ω...
Page 90: Removing The Unit
The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
Page 91: Electrical Connections
ELECTRICAL CONNECTIONS Typical connections / °“√‡™◊ Ë Õ ¡µË Õ ·∫∫ª°µ Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. Connect the colored leads of the power cord in the order specified in the illustration below.
Page 92: Troubleshooting
ENGLISH Connecting the external amplifiers and/or subwoofer / You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
Page 93 Connecting subwoofer / Y-connector (not supplied for this unit) ¢È Õ µË Õ √Ÿ ª µ— « (‰¡Ë ‰ ¥È „ ÀÈ ¡ “°— ∫ ™ÿ ¥ ª√–°Õ∫π’ È ) JVC Amplifier ‡§√◊ Ë Õ ß¢¬“¬‡ ’ ¬ ß...
Page 94 Connecting the external components / CD changer, Apple iPod®, or JVC D. player / CD • Set “Changer” for the external input setting (See page 21 of the INSTRUCTIONS.) / You can connect these components as illustrated below. The iPod* an interface adapter (not supplied)—KS-PD100 (for iPod) or KS-PD500 (for D.
Page 95 ALAT PENERIMA CD For canceling the display demonstration, see page 8. Untuk membatalkan tampilan demonstrasi, lihat halaman 8. For installation and connections, refer to the separate manual. Untuk instalasi dan penyambungan, lihat buku pedoman terpisah. INSTRUCTIONS BUKU PETUNJUK KD-SH1000 KD-SH1000 GET0365-004A [UN]...
Page 96 IMPORTANT FOR LASER PRODUCTS CAUTION: CAUTION: Warning: Caution on volume setting: Notice: How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • If this does not work, reset your unit. •...
Page 97 CONTENTS Basic operations ... 7 Playing a disc in the unit ... 11 Playing discs in the CD changer ... 11 Playing from an SD card ... 11 Playing from a USB memory ... 12 Selecting the DSP modes (DSP) ... 15 Using the equalizer—EQ ...
Page 98 When using the remote controller...
Page 99 Control panel ∞ ¢ DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting).
Page 100 Remote controller — RM-RK300...
Page 101 ∞ • Changes the preset stations. • folders. • – Pauses/stops or resumes playback with ∞. – Enters the main menu with 5. (Now 5/∞/4/¢ work as the menu selecting buttons.)* Adjusts the volume level. • Selects the preset station if pressed, or store a station if pressed and held.
Page 102 To drop the volume in a moment (ATT) To turn off the power Basic settings Enter the PSM menu (see page 4). Canceling the display demonstrations Setting the clock Finish the procedure. To check the current clock time while the power is turned off Radio operations Ÿ...
Page 103 To restore the stereo effect, Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) Enter the MODE menu (see page 4). To tune in to all receivable stations, Storing stations in memory FM station automatic presetting — SSM (Strong-station Sequential Memory) Select the FM band (FM1 –...
Page 104 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station When using the remote controller Directly select the preset number.
Page 105 Disc/SD card/USB memory operations Ÿ SD loading slot SD card...
Page 106 ⁄ Ÿ USB input terminal USB memory...
Page 107 To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) Other main functions Selecting a disc/folder/track on the list Enter the MODE menu (see page 4). Select a list type. * Selectable only when the source is “CD-CH.”...
Page 108 Prohibiting disc ejection After making sure “No Eject?” is selected... To cancel the prohibition, Selecting the playback modes Enter the MODE menu (see page 4). Select one of the playback modes. Select one of the items (see the following table) Finish the procedure.
Page 109 Sound adjustments Selecting the DSP modes (DSP) DSP modes Defeat (No acoustic effect is applied), Theater, Hall, Club, Dome, Studio, V.Cancel (Voice Cancel: Reduces the vocal sounds. Good for mastering your favorite songs— Karaoke.) Enter the DSP menu (see page 4). Ÿ...
Page 110 Select the distance between the selected speaker and the seat. To change the measuring unit Repeat steps 4 and 5 to adjust the distance for the other speakers. Finish the procedure. Enter the BBE menu (see page 4). Select the effect level. Finish the procedure.
Page 111 Select a sound mode. Select a frequency band. Adjust the enhanced level for the selected frequency band. Repeat steps 2 and 3 to adjust the other frequency bands. Select one of the user modes. Store the adjustments. Enter the EQ menu (see page 4). Select a band.
Page 112 If you have installed the 3-way network speaker system in the car, make sure of the following: While the power is turned off... Ÿ To cancel the procedure, ⁄ Finish the procedure. To cancel Crossover, Enter the SEL menu (see page 4). Ÿ...
Page 114 General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Enter the PSM menu (see page 4). Select a PSM item. • • • • Select or adjust the selected PSM item. Repeat steps 2 and 3 to adjust the other PSM items if necessary.
Page 115 Indications Items Bright 1 10 ID3 Tag • • Theme • Large Small • IF Band Auto • Wide • Beep Ext In Changer Ext In Muting 1/ Muting 2 Amp Gain High PWR Low PWR Some characters or symbols will not be shown correctly (or will be blanked) on the display. Displayed only when one of the following sources is selected—FM, AM, CD, SD, USB, or LINE-IN.
Page 116 Selecting timer for the dimmer You can dim the display at night or as you set the timer. Select “Dimmer” from the PSM menu. Select “Time Set.” Adjust the dimmer time. Set the dimmer start time. : [0 – 23] 24Hours : [1A (1AM) –...
Page 117 Title assignment Sources Maximum number of characters * You cannot assign names to any discs other than conventional CDs. Á To erase the entire title = á...
Page 118 iPod®/D. player operations Caution: Preparations: Ÿ ⁄ To pause playback To fast-forward or reverse the track To go to the next or previous tracks * For iPod * For D. player or stop...
Page 119 Selecting a track from the menu Enter the main menu. Now the 5/∞/4 /¢ work as the menu selecting buttons*. * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track.
Page 120 Other external component operations LINE-IN : EXT-IN : Ÿ Turn on the connected component and start playing the source. Adjust the volume. ⁄ Adjust the sound as you want. (See pages 15 – 19.) Maintenance How to clean the connectors Connector Moisture condensation How to handle discs...
Page 121 To keep discs clean To play new discs How to handle SD card Warped disc Sticker Sticker residue Stick-on label More about this unit Basic operations Turning on the power Turning off the power Tuner operations Storing stations in memory Disc/SD card/USB memory operations Caution for DualDisc playback Continued on the next page...
Page 122 General Inserting a disc Playing a CD-R or CD-RW Playing an MP3/WMA discs * The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 313 or more.
Page 123 Playing MP3/WMA tracks from an SD card or a USB memory Changing the source Ejecting a disc Continued on the next page...
Page 124 Sound adjustments Selecting the DSP modes—DSP Storing your own sound modes Setting the sound modes—SEL General settings — PSM Title assignment iPod® or D. player operations Notice: For iPod users: For D. player users:...
Page 126 Troubleshooting...
Page 128 Symptoms Remedies/Causes...
Page 129 Symptoms • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • SD logo is a trademark. • Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
Page 130 Specifications...
Page 131 Design and specifications are subject to change without notice.
Page 132 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Ada MASALAH dengan cara pengoperasian? Setel kembali unit Anda Lihat halaman mengenai Bagaimana mereset unit anda EN, IN © 2006 Victor Company of Japan, Limited 0206DTSMDTJEIN...
Page 133 KD-SH1000 Installation/Connection Manual Manual Pemasangan/Penyambungan GET0365-009A [UN] ENGLISH WARNINGS Ω Ω INDONESIA PERINGATAN © 2006 Victor Company of Japan, Limited Ω Ω × × 0206DTSMDTJEIN EN, IN...
Page 134 INSTALLATION (IN-DASH MOUNTING) PEMASANGAN (BINGKAI-DALAM DASH) × × × ×...
Page 135 ELECTRICAL CONNECTIONS Typical connections / Ciri khas sambungan-sambungan Before connecting: If you have installed 3-way network speaker system in your car, Ke subwoofer (lihat diagram Konektor antena Terminal tanah belakang Keluaran (lihat diagram Ke komponen luar (lihat diagram Tidak disediakan untuk alat penerima. Sebelum pengecekan pengoperasian dari alat penerima ini sebelum pemasangan, ujung ini harus sudah dihubungkan, selain itu power tidak dapat dihidupkan.
Page 136 ENGLISH – JVC Amplifier Penguat JVC JVC Amplifier Penguat JVC TROUBLESHOOTING INDONESIA JVC Amplifier Penguat JVC PEMECAHAN MASALAH...
Page 137 JVC Amplifier Penguat JVC JVC Amplifier Penguat JVC JVC Amplifier Penguat JVC...
Page 138 Connecting the external components / Menyambung komponen eksternal CD changer, Apple iPod®, or JVC D. player / CD changer, Apple iPod • Set “Changer” for the external input setting (See page 21 of the INSTRUCTIONS.) / Aturlah “Changer” untuk pengaturan input eksternal (Lihat halaman 21 dari BUKU PETUNJUK.) CAUTION / PERINGATAN: •...
Page 139 CD RECEIVER For canceling the display demonstration, see page 8. For installation and connections, refer to the separate manual. INSTRUCTIONS KD-SH1000 KD-SH1000 GET0365-005A [UT]...
Page 140 IMPORTANT FOR LASER PRODUCTS CAUTION: CAUTION: Warning: Caution on volume setting: Notice: How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • If this does not work, reset your unit. •...
Page 141 CONTENTS Basic operations ... 7 Playing a disc in the unit ... 11 Playing discs in the CD changer ... 11 Playing from an SD card ... 11 Playing from a USB memory ... 12 Selecting the DSP modes (DSP) ... 15 Using the equalizer—EQ ...
Page 142 When using the remote controller...
Page 143 Control panel ∞ ¢ DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting).
Page 144 Remote controller — RM-RK300...
Page 145 ∞ • Changes the preset stations. • folders. • – Pauses/stops or resumes playback with ∞. – Enters the main menu with 5. (Now 5/∞/4/¢ work as the menu selecting buttons.)* Adjusts the volume level. • Selects the preset station if pressed, or store a station if pressed and held.
Page 146 To drop the volume in a moment (ATT) To turn off the power Basic settings Enter the PSM menu (see page 4). Canceling the display demonstrations Setting the clock Finish the procedure. To check the current clock time while the power is turned off Radio operations Ÿ...
Page 147 To restore the stereo effect, Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) Enter the MODE menu (see page 4). To tune in to all receivable stations, Storing stations in memory FM station automatic presetting — SSM (Strong-station Sequential Memory) Select the FM band (FM1 –...
Page 148 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station When using the remote controller Directly select the preset number.
Page 149 Disc/SD card/USB memory operations Ÿ SD loading slot SD card...
Page 150 ⁄ Ÿ USB input terminal USB memory...
Page 151 To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) Other main functions Selecting a disc/folder/track on the list Enter the MODE menu (see page 4). Select a list type. * Selectable only when the source is “CD-CH.”...
Page 152 Prohibiting disc ejection After making sure “No Eject?” is selected... To cancel the prohibition, Selecting the playback modes Enter the MODE menu (see page 4). Select one of the playback modes. Select one of the items (see the following table) Finish the procedure.
Page 153 Sound adjustments Selecting the DSP modes (DSP) DSP modes Defeat (No acoustic effect is applied), Theater, Hall, Club, Dome, Studio, V.Cancel (Voice Cancel: Reduces the vocal sounds. Good for mastering your favorite songs— Karaoke.) Enter the DSP menu (see page 4). Ÿ...
Page 154 Select the distance between the selected speaker and the seat. To change the measuring unit Repeat steps 4 and 5 to adjust the distance for the other speakers. Finish the procedure. Enter the BBE menu (see page 4). Select the effect level. Finish the procedure.
Page 155 Select a sound mode. Select a frequency band. Adjust the enhanced level for the selected frequency band. Repeat steps 2 and 3 to adjust the other frequency bands. Select one of the user modes. Store the adjustments. Enter the EQ menu (see page 4). Select a band.
Page 156 If you have installed the 3-way network speaker system in the car, make sure of the following: While the power is turned off... Ÿ To cancel the procedure, ⁄ Finish the procedure. To cancel Crossover, Enter the SEL menu (see page 4). Ÿ...
Page 158 General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Enter the PSM menu (see page 4). Select a PSM item. • • • • Select or adjust the selected PSM item. Repeat steps 2 and 3 to adjust the other PSM items if necessary.
Page 159 Indications Items Bright 1 10 ID3 Tag • • Theme Large • Small • IF Band Auto • Wide • Beep Ext In Changer Ext In Muting 1/ Muting 2 Amp Gain High PWR Low PWR Some characters or symbols will not be shown correctly (or will be blanked) on the display. Displayed only when one of the following sources is selected—FM, AM, CD, SD, USB, or LINE-IN.
Page 160 Selecting timer for the dimmer You can dim the display at night or as you set the timer. Select “Dimmer” from the PSM menu. Select “Time Set.” Adjust the dimmer time. Set the dimmer start time. : [0 – 23] 24Hours : [1A (1AM) –...
Page 161 Title assignment Sources Maximum number of characters * You cannot assign names to any discs other than conventional CDs. Á To erase the entire title = á...
Page 162 iPod®/D. player operations Caution: Preparations: Ÿ ⁄ To pause playback To fast-forward or reverse the track To go to the next or previous tracks * For iPod * For D. player or stop...
Page 163 Selecting a track from the menu Enter the main menu. Now the 5/∞/4 /¢ work as the menu selecting buttons*. * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track.
Page 164 Other external component operations LINE-IN : EXT-IN : Ÿ Turn on the connected component and start playing the source. Adjust the volume. ⁄ Adjust the sound as you want. (See pages 15 – 19.) Maintenance How to clean the connectors Connector Moisture condensation How to handle discs...
Page 165 To keep discs clean To play new discs How to handle SD card Warped disc Sticker Sticker residue Stick-on label More about this unit Basic operations Turning on the power Turning off the power Tuner operations Storing stations in memory Disc/SD card/USB memory operations Caution for DualDisc playback Continued on the next page...
Page 166 General Inserting a disc Playing a CD-R or CD-RW Playing an MP3/WMA discs * The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 313 or more.
Page 167 Playing MP3/WMA tracks from an SD card or a USB memory Changing the source Ejecting a disc Continued on the next page...
Page 168 Sound adjustments Selecting the DSP modes—DSP Storing your own sound modes Setting the sound modes—SEL General settings — PSM Title assignment iPod® or D. player operations Notice: For iPod users: For D. player users:...
Page 170 Troubleshooting...
Page 172 Symptoms Remedies/Causes...
Page 173 Symptoms • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • SD logo is a trademark. • Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
Page 174 Specifications...
Page 175 Design and specifications are subject to change without notice.
Page 176 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit EN, CT © 2006 Victor Company of Japan, Limited 0206DTSMDTJEIN...
Page 177 • Be sure to ground this unit to the car’s chassis again after installation. Notes: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio dealer. • It is recommended to connect to the speakers with maximum power of more than 50 W (both at the rear and at the front, with an impedance of 4 Ω...
Page 178 The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
Page 179 ELECTRICAL CONNECTIONS Typical connections / Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. Connect the colored leads of the power cord in the order specified in the illustration below.
Page 180 ENGLISH Connecting the external amplifiers and/or subwoofer You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
Page 181 • White White with black stripe Green Green with black stripe Connecting subwoofer / Y-connector (not supplied for this unit) — JVC Amplifier HPF/LPF Gray Right high-range speaker Gray with black stripe Purple Right mid-range speaker Purple with black stripe...
Page 182 Connecting the external components / CD changer, Apple iPod®, or JVC D. player / CD • Set “Changer” for the external input setting (See page 21 of the INSTRUCTIONS.) / You can connect these components as illustrated below. The iPod* an interface adapter (not supplied)—KS-PD100 (for iPod) or KS-PD500 (for D.
Page 183 CD RECEIVER RECEPTEUR CD KD-SH1000 For canceling the display demonstration, see page 8. Pour annuler la démonstration des affichages, référez-vous à la page 8. For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé.
Page 184 IMPORTANT FOR LASER PRODUCTS CAUTION: CAUTION: Warning: Caution on volume setting: Notice: How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • If this does not work, reset your unit. •...
Page 185 • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 34 – 38). Press briefly. Press repeatedly. Press and hold until your desired response begins.
Page 186 How to detach/attach the control panel Detaching... Attaching... How to change the control panel angle When using the remote controller Caution: How to enter the various menus Select a menu you want. Time countdown indicator Enter the selected menu. Operate as instructed on the screen.
Page 187: Parts Identification
How to change the display information and patterns Ex.: When tuner is selected as the source Source operation display Large graphic display (full display size) Control panel 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞...
Page 188 Remote controller — RM-RK300...
Page 189 Selects the source. ∞ • Changes the service. • folders. • – Pauses/stops or resumes playback with ∞. – Enters the main menu with 5. (Now 5/∞/4/¢ work as the menu selecting buttons.)* Adjusts the volume level. • Selects the preset station (or service) if pressed, or store a station (or a service) if pressed and held.
Page 190 To drop the volume in a moment (ATT) To turn off the power Basic settings Enter the PSM menu (see page 4). Canceling the display demonstrations Setting the clock Finish the procedure. To check the current clock time while the power is turned off Radio operations Ÿ...
Page 191 To restore the stereo effect, Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) Enter the MODE menu (see page 4). To tune in to all receivable stations, Storing stations in memory FM station automatic presetting — SSM (Strong-station Sequential Memory) Select the FM band (FM1 –...
Page 192 When using the remote controller When using the remote controller...
Page 193: Fm Rds Operations
Ÿ FM RDS operations Continued on the next page...
Page 194 Store the setting. To store other PTY codes into other preset numbers. Finish the procedure. Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 24).
Page 195 Tracing the same programme— Network-Tracking Reception Programme A broadcasting on different frequency areas (01 – 05) To change the Network-Tracking Reception setting, Automatic station selection— Programme Search Using the message service— RDS Radiotext (RT) What is RDS Radiotext To show the RDS Radiotext (RT) information...
Page 196 Disc/SD card/USB memory operations * If you have changed the external input setting to “Ext In” (see page 25), you cannot select the CD changer. Ÿ...
Page 197 ⁄ Ÿ Continued on the next page...
Page 198 To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) Other main functions Selecting a disc/folder/track on the list Enter the MODE menu (see page 4). Select a list type. * Selectable only when the source is “CD-CH.”...
Page 199 Prohibiting disc ejection You can lock a disc in the loading slot. After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected.
Page 200 Sound adjustments Enter the DSP menu (see page 4). Ÿ Select one of the DSP modes. To finish the procedure To adjust the effect level Adjust the effect level. To finish the procedure To make more precise settings, To cancel the acoustic effect, Ÿ...
Page 201 Select the distance between the selected speaker and the seat. To change the measuring unit Repeat steps 4 and 5 to adjust the distance for the other speakers. Finish the procedure. Enter the BBE menu (see page 4). Select the effect level. Finish the procedure.
Page 202 Select a sound mode. Select a frequency band. Adjust the enhanced level for the selected frequency band. Repeat steps 2 and 3 to adjust the other frequency bands. Select one of the user modes. Store the adjustments. Enter the EQ menu (see page 4). Select a band.
Page 203 If you have installed the 3-way network speaker system in the car, make sure of the following: While the power is turned off... Ÿ To cancel the procedure, ⁄ Finish the procedure. To cancel Crossover, Enter the SEL menu (see page 4). Ÿ...
Page 205 General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Enter the PSM menu (see page 4). Select a PSM item. Indications Items Demo Anime Clock H 0 23 1 12 Clock M 00 59 24H/12H 12Hours...
Page 206 Indications Items Dimmer Auto • Time Set • • • Bright 1 10 ID3 Tag • • Theme Large • Small • PTY Stby AF-Reg • AF Reg • • TA Vol 0 30 50 P-Search • • IF Band Auto •...
Page 207 Indications Items Beep Ext In Changer Ext In Muting 1/ Muting 2 Amp Gain High PWR Low PWR Some characters or symbols will not be shown correctly (or will be blanked) on the display. Depends on the amplifier gain control. Displayed only when DAB tuner is connected.
Page 208 Selecting the graphic theme Select “Theme” from the PSM menu. Select the size of the display. Select the theme. Repeat steps 2 and 3 to select the other display size and theme. Finish the procedure. To show the selected display theme, Title assignment Sources Maximum number of characters...
Page 209 Move to the next (or previous) character position. Repeat steps finish entering the title. Finish the procedure. To erase the entire title Available characters iPod®/D. player operations until you Interface adapter for iPod D. player interface adapter Caution: Preparations: Ÿ Continued on the next page...
Page 210 ⁄ 5 ∞ 4 ¢ – – For iPod: Ô Ô Ô Ô Ô For D. player: Ô Ô Ô ¢ Ô Ô Ô...
Page 211: Dab Tuner Operations
“MENU.” DAB tuner operations What is DAB system? It is recommended to use DAB tuner KT-DB1000 with your unit. If you have another DAB tuner, consult your JVC IN-CAR ENTERTAINMENT dealer. Ÿ Start searching for an ensemble. To stop searching,...
Page 212 ⁄...
Page 213 Store the service. When using the remote controller Tuning in to a preset DAB service Enter the MODE menu (see page 4). Select “List.” Select a preset number. When using the remote controller Using the Standby Receptions TA (Road Traffic News) Standby Reception PTY Standby Reception Announcement Standby Reception...
Page 214 Select an announce type. Finish the procedure. • If the ANN indicator lights up, Announcement Standby Reception is activated. • If the ANN indicator flashes, Announcement Standby Reception is not yet activated. To activate, tune in to another service providing these signals. The ANN indicator will stop flashing and remain lit.
Page 215 Other external component operations LINE-IN : EXT-IN : Ÿ Turn on the connected component and start playing the source. Adjust the volume. ⁄ Adjust the sound as you want. (See pages 18 – 22.) Maintenance How to clean the connectors Connector Moisture condensation How to handle discs...
Page 216 More about this unit...
Page 219 Sound adjustments Selecting the DSP modes—DSP Storing your own sound modes Setting the sound modes—SEL General settings — PSM Title assignment iPod® or D. player operations Notice: For iPod users: For D. player users: DAB tuner operations Continued on the next page...
Page 220 Troubleshooting...
Page 222 Symptoms Remedies/Causes...
Page 223 Symptoms • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • SD logo is a trademark. • Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
Page 224 Specifications...
Page 225 Design and specifications are subject to change without notice.
Page 226 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil EN, FR 0106DTSMDTJEIN © 2006 Victor Company of Japan, Limited...
Page 227 KD-SH1000 Installation/Connection Manual Manuel d’installation/raccordement GET0366-010A [EX/EU] ENGLISH WARNINGS Ω Ω FRANÇAIS AVERTISSEMENTS 0106DTSMDTJEIN EN, FR © 2006 Victor Company of Japan, Limited Ω Ω × ×...
Page 228 INSTALLATION (IN-DASH MOUNTING) Removing the unit When using the optional stay / Lors de l’utilisation du hauban en option Caution when installing / Précautions lors de l’installation INSTALLATION (MONTAGE DANS LE TABLEAU DE BORD) Retrait de l’appareil When installing the unit without using the sleeve / Lors de l’installation de l’appareil scans utiliser de manchon ×...
Page 229 ELECTRICAL CONNECTIONS If your car is equipped with the ISO connector / Si votre voiture est équippée d’un connecteur ISO • Connections without using the ISO connectors / Connexions sans l’utilisation des connecteurs ISO Before connecting: If you have installed 3-way network speaker system in your car, RACCORDEMENTS ELECTRIQUES For some VW/Audi or Opel (Vauxhall) automobile / Pour certaine voiture VW/Audi ou Opel (Vauxhall)
Page 230 ENGLISH – JVC Amplifier JVC Amplificateur JVC Amplifier JVC Amplificateur FRANÇAIS JVC Amplifier JVC Amplificateur...
Page 231 JVC Amplifier JVC Amplificateur JVC Amplifier JVC Amplificateur JVC Amplifier JVC Amplificateur...
Page 232 JVC CD changer JVC DAB tuner Changeur CD JVC Tuner DAB JVC JVC DAB tuner JVC CD changer Tuner DAB JVC Changeur CD JVC External component Appareil extérieur External component Appareil extérieur External component Appareil extérieur...
Page 233 CD RECEIVER CD-RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ KD-SH1000 INSTRUCTIONS BEDIENUNGSANLEITUNG ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ GET0366-006A [EY]...
Page 234 IMPORTANT FOR LASER PRODUCTS CAUTION: CAUTION: Warning: Caution on volume setting: Notice: How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • If this does not work, reset your unit. •...
Page 235 • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 34 – 38). Press briefly. Press repeatedly. Press and hold until your desired response begins.
Page 236 How to detach/attach the control panel Detaching... Attaching... How to change the control panel angle When using the remote controller Caution: How to enter the various menus Select a menu you want. Time countdown indicator Enter the selected menu. Operate as instructed on the screen.
Page 237 How to change the display information and patterns Ex.: When tuner is selected as the source Source operation display Large graphic display (full display size) Control panel 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞...
Page 238 Remote controller — RM-RK300...
Page 239 Selects the source. ∞ • Changes the service. • folders. • – Pauses/stops or resumes playback with ∞. – Enters the main menu with 5. (Now 5/∞/4/¢ work as the menu selecting buttons.)* Adjusts the volume level. • Selects the preset station (or service) if pressed, or store a station (or a service) if pressed and held.
Page 240 To drop the volume in a moment (ATT) To turn off the power Basic settings Enter the PSM menu (see page 4). Canceling the display demonstrations Setting the clock Finish the procedure. To check the current clock time while the power is turned off Radio operations Ÿ...
Page 241 To restore the stereo effect, Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) Enter the MODE menu (see page 4). To tune in to all receivable stations, Storing stations in memory FM station automatic presetting — SSM (Strong-station Sequential Memory) Select the FM band (FM1 –...
Page 242 When using the remote controller When using the remote controller...
Page 243 Ÿ FM RDS operations Continued on the next page...
Page 244 Store the setting. To store other PTY codes into other preset numbers. Finish the procedure. Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 24).
Page 245 Tracing the same programme— Network-Tracking Reception Programme A broadcasting on different frequency areas (01 – 05) To change the Network-Tracking Reception setting, Automatic station selection— Programme Search Using the message service— RDS Radiotext (RT) What is RDS Radiotext To show the RDS Radiotext (RT) information...
Page 246 Disc/SD card/USB memory operations * If you have changed the external input setting to “Ext In” (see page 25), you cannot select the CD changer. Ÿ...
Page 247 ⁄ Ÿ Continued on the next page...
Page 248 To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) Other main functions Selecting a disc/folder/track on the list Enter the MODE menu (see page 4). Select a list type. * Selectable only when the source is “CD-CH.”...
Page 249 Prohibiting disc ejection You can lock a disc in the loading slot. After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected.
Page 250 Sound adjustments Enter the DSP menu (see page 4). Ÿ Select one of the DSP modes. To finish the procedure To adjust the effect level Adjust the effect level. To finish the procedure To make more precise settings, To cancel the acoustic effect, Ÿ...
Page 251 Select the distance between the selected speaker and the seat. To change the measuring unit Repeat steps 4 and 5 to adjust the distance for the other speakers. Finish the procedure. Enter the BBE menu (see page 4). Select the effect level. Finish the procedure.
Page 252 Select a sound mode. Select a frequency band. Adjust the enhanced level for the selected frequency band. Repeat steps 2 and 3 to adjust the other frequency bands. Select one of the user modes. Store the adjustments. Enter the EQ menu (see page 4). Select a band.
Page 253 If you have installed the 3-way network speaker system in the car, make sure of the following: While the power is turned off... Ÿ To cancel the procedure, ⁄ Finish the procedure. To cancel Crossover, Enter the SEL menu (see page 4). Ÿ...
Page 255 General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Enter the PSM menu (see page 4). Select a PSM item. Indications Items Demo Anime Clock H 0 23 1 12 Clock M 00 59 24H/12H 12Hours...
Page 256 Indications Items Dimmer Auto • Time Set • • • Bright 1 10 ID3 Tag • • Theme Large • Small • PTY Stby AF-Reg • AF Reg • • TA Vol 0 30 50 P-Search • • IF Band Auto •...
Page 257 Indications Items Beep Ext In Changer Ext In Muting 1/ Muting 2 Amp Gain High PWR Low PWR Some characters or symbols will not be shown correctly (or will be blanked) on the display. Depends on the amplifier gain control. Displayed only when DAB tuner is connected.
Page 258 Selecting the graphic theme Select “Theme” from the PSM menu. Select the size of the display. Select the theme. Repeat steps 2 and 3 to select the other display size and theme. Finish the procedure. To show the selected display theme, Title assignment Sources Maximum number of characters...
Page 259 Move to the next (or previous) character position. Repeat steps finish entering the title. Finish the procedure. To erase the entire title Available characters iPod®/D. player operations until you Interface adapter for iPod D. player interface adapter Caution: Preparations: Ÿ Continued on the next page...
Page 260 ⁄ 5 ∞ 4 ¢ – – For iPod: Ô Ô Ô Ô Ô For D. player: Ô Ô Ô ¢ Ô Ô Ô...
Page 261 “MENU.” DAB tuner operations What is DAB system? It is recommended to use DAB tuner KT-DB1000 with your unit. If you have another DAB tuner, consult your JVC IN-CAR ENTERTAINMENT dealer. Ÿ Start searching for an ensemble. To stop searching,...
Page 262 ⁄...
Page 263 Store the service. When using the remote controller Tuning in to a preset DAB service Enter the MODE menu (see page 4). Select “List.” Select a preset number. When using the remote controller Using the Standby Receptions TA (Road Traffic News) Standby Reception PTY Standby Reception Announcement Standby Reception...
Page 264 Select an announce type. Finish the procedure. • If the ANN indicator lights up, Announcement Standby Reception is activated. • If the ANN indicator flashes, Announcement Standby Reception is not yet activated. To activate, tune in to another service providing these signals. The ANN indicator will stop flashing and remain lit.
Page 265 Other external component operations LINE-IN : EXT-IN : Ÿ Turn on the connected component and start playing the source. Adjust the volume. ⁄ Adjust the sound as you want. (See pages 18 – 22.) Maintenance How to clean the connectors Connector Moisture condensation How to handle discs...
Page 266 More about this unit...
Page 269 Sound adjustments Selecting the DSP modes—DSP Storing your own sound modes Setting the sound modes—SEL General settings — PSM Title assignment iPod® or D. player operations Notice: For iPod users: For D. player users: DAB tuner operations Continued on the next page...
Page 270 Troubleshooting...
Page 272 Symptoms Remedies/Causes...
Page 273 Symptoms • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • SD logo is a trademark. • Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
Page 274 Specifications...
Page 275 Design and specifications are subject to change without notice.
Page 276 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Затруднения при эксплуатации? Пожалуйста, перезагрузите Ваше устройство Для...
Page 277 KD-SH1000 Installation/Connection Manual Einbau/Anschlußanleitung Руководство по установке/подключению GET0366-013A [EY] WARNINGS WARNUNGEN 0106DTSMDTJEIN EN, GE, RU © 2006 Victor Company of Japan, Limited ПРЕДУПРЕЖДЕНИЯ × × ×...
Page 278 INSTALLATION (IN-DASH MOUNTING) EINBAU (IM ARMATURENBRETT) × × × • УСТАНОВКА (УСТАНОВКА В ПРИБОРНУЮ ПАНЕЛЬ) × × ×...
Page 279 ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHLÜSSE...
Page 280 JVC Amplifier JVC Verstärker JVC Amplifier JVC Verstärker Sie können Verstärker anschließen, um Ihre Autostereoanlage zu erweitern. • • • Отсоедините громкоговорители от данного устройства, подключите их к усилителю. Оставьте провода громкоговорителей данного устройства неиспользованными. JVC Amplifier JVC Verstärker...
Page 281 JVC Amplifier JVC Verstärker JVC Amplifier JVC Verstärker JVC Amplifier JVC Verstärker...
Page 282 JVC CD changer JVC DAB tuner CD-Wechsler von JVC DAB-Tuner von JVC JVC CD changer JVC DAB tuner CD-Wechsler von JVC DAB-Tuner von JVC External component Externe Komponente External component Externe Komponente External component Externe Komponente...

This manual is also suitable for:

Kd-sh1000e Kd-sh1000eu Kd-sh1000ex Kd-sh1000ey Kd-sh1000j Kd-sh1000u ... Show all

JVC KD-SH1000 Instructions Manual

Quick Links

Related Manuals for JVC KD-SH1000

Summary of Contents for JVC KD-SH1000

This manual is also suitable for:

Table of Contents