Selecting the level display
You can select the level display according to your preference.
When shipped from the factory, "AUDIO 2" is selected.
AUDIO1: Shows the audio level indicator and the equalization pattern indicator.
AUDIO2: Alternates "AUDIO 1" setting and illumination display.
OFF:
Erases the audio level indicator and the equalization pattern indicator.
3
1
2
SSM
3
4
Equalization pattern indicator
Level indicator
Press and hold SEL for more than 2 seconds.
"CLOCK H", "CLOCK M", "SCM LINK", "LEVEL", "BEEP
or "LINE IN*" appears on the display.
* Displayed only when one of the following sources is selected —
FM, AM and CD. (ONLY FOR KD-SX750)
** (ONLY FOR KD-SX850)
Select "LEVEL" if not shown on the display.
* (ONLY FOR KD-SX750)
** (ONLY FOR KD-SX850)
Select the desired mode —"AUDIO1",
AUDIO2" or "OFF".
Finish the setting.
2
**
", "AREA"
21