Selecting The Level Display - JVC KD-S670 Instructions Manual

Selecting the level display

You can select the level display according to your preference.
When shipped from the factory, "AUDIO 2" is selected.
AUDIO 1: Shows the audio level indicator and the equalization pattern indicator.
AUDIO 2: Alternates "AUDIO 1" setting and illumination display.
OFF: Erases the audio level indicator and the equalization pattern indicator.
3
1
2
3
4
1, 4
Equalization pattern indicator
and Level indicator
Press and hold SEL for more than 2 seconds.
"CLOCK H," "CLOCK M," "SCM LINK," or "LEVEL" appears
on the display.
Select "LEVEL" if not shown on the display.
Select the desired mode —"AUDIO 1", AUDIO
2" or "OFF".
Finish the setting.
2
21