External Component Operations; External Component Operations (Only For Kd-Sx750) - JVC KD-SX750 Instructions Manual

EXTERNAL COMPONENT OPERATIONS

External component operations
This section is ONLY FOR KD-SX750.
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
3
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See "Selecting the external component to use" on page 31.)
1
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
2
Turn on the connected device and start playing the source.
3
30
Select the external component.
• If "LINE IN" does not appear on the display, see page 31
and select the external input ("LINE IN").
Adjust the volume.
1