Service Parts List; Parts List For Mechanism - Citizen CBM-270 Service Manual

• Label Sensor Failure (Only When the Printer Accommodates the Labels)
Phenomenon
A label is not detected.
• Others (Operational Failure Included)
Phenomenon
At power-on, the PAPER
and ERROR lamps
remain illuminated.
At power-on, the ERROR
lamp blinks.
Kanji is not printed.
Erroneous printing or
malfunctioning
A printer body or internal
temperature is high.
The ERROR lamp blinks
during operation.
The PAPER lamp blinks
while being used as the
label printer.

5. SERVICE PARTS LIST

5.1

Parts List for Mechanism

Ref.No. Parts No.
1-01 27ADJ
1-02 27ADU
1-03 27ADE
2 E62040500
3
Cause
Not set for the label printer
Non-specified label paper
used
Faulty sensor
Cause
Faulty control board
Faulty memory
No Kanji ROM
Faulty Kanji ROM
The printer is used in a
noisy place.
Bad working environment
A macro is running.
The printer has discharged
the paper and is cutting it.
AC Adapter 27AD with JPN Cord, $ = 140
AC Adapter 27AD with USA Cord, $ = 140
AC Adapter 27AD with EUR Cord, $ = 140
Printer Cover 270
Paper Set Label 270 SEC-2608
Check Method
Check whether or not the
DIP switch has been set for
the label printer
−−−
−−−
Check Method
−−−
−−−
Check whether or not the
printer is for oversea use.
−−−
Check whether or not there
is any noise emitting object
around the printer.
Check the working
environment and
installation site.
In macro execution, check
whether or not manual
operation (macro execution
by the FEED switch) is
selected.
Check whether or not a
paper discharge command
is being executed.
1/1
Description
CBM-270 Service Manual
CBM-270 Service Manual
Repair Method
Set the DIP switch for
the label printer.
Use the recommended
label paper.
Replace the label sensor.
Repair Method
Replace the control
board.
Replace the memory or
control board.
Replace the control
board with one for
domestic use or attach
the Kanji ROM.
Replace the Kanji ROM.
Change the place.
Move the printer to a
well-ventilated place
within the specified
temperature range.
Press the FEED switch.
Cut the paper and press
the FEED switch.
Q'ty Remarks
(1)
(1)
(1)
1
1